Kenmore FeatherLite DU1040 User Manual

2. Turn on the vacuum cleaner by pressing
the power button with your foot.
3. Once the vacuum is on, operate the
vacuum cleaner by tilting the handle
back towards you and the nozzle is flush
with floor surface.
4. Once you have completed vacuuming,
press the power button again. Return
the handle to the fully upright position
by pushing the handle forward until the
vacuum body is locked down in place.
Unplug the power cord from the power
outlet.
UPRIGHT MODE
NOTE:
Make sure the vacuum cleaner
is completely assembled and the dust cup
is empty before using. Do not operate
vacuum cleaner without filters in place.
1. Release the handle by placing foot on
the floor nozzle and pull back to change
handle position.
NOTE:
Always keep the brushroll free
of carpet fiber, string, or hair build-up to
maintain a longer life of the brushroll belt.
If the brushroll is entangled by any string
or hair, stop using and clean the brushroll
immediately.
PILE HEIGHT SELECTION AND SETTINGS
Select a pile height setting by turning the
height adjust selector located on the floor
nozzle.
Suggested Pile Height Settings
There are four (4) pile height settings on
the vacuum cleaner. For best deep down
cleaning of low pile carpet, use the MED
LOW setting. However, you may need to
raise the height to make some jobs easier,
such as scatter rugs and some deep pile
carpets.
- 12 -
OPERATION MODES
Power Button
Height Adjust
Selector

Kenmore FeatherLite DU1040 Specifications

General

Brand	Kenmore
Model	FeatherLite DU1040
Category	Vacuum Cleaner
Language	English