- 8 -
1. Insert the handle into the wand until you
hear a ‘click’.
2. Insert the wand into the main body until
you hear a ‘click’.
3. Align the attachment holder clip with
the front of the wand as shown. Make
sure the oval hole aligns with the
corresponding protrusion on the wand.
Push and snap into place on wand.
Before assembling the vacuum cleaner, check the PACKING LIST (page 2). Use this list to
verify that you have received all the components of your new Kenmore Bagless Upright
Vacuum Cleaner.
Please pay special attention to these hazard alert boxes, and follow any
instructions given.
WARNING
statements alert you to such hazards as fire,
electric shock, burns and personal injury.
CAUTION
statements alert you to
such hazards as personal injury and/or property damage.
ASSEMBLY INSTRUCTIONS
Attachment
Holder
4. Align the hose storage with the back of
the wand as shown. Make sure the large
oval hole aligns with the corresponding
protrusion on the wand. Push and snap
into place on wand.
Hose
Storage
To Next Page
Loading...
Need help?
General
