13
Reversing Door Swing
Reversing door assembly
Lift the inner glass and plastic ring. Rotate them 180 1.
degrees, reinstall on outer door, lining up indicators -
“LH” for left-hand hinge or “RH” for right-hand hinge.
Rotate inner door 180 degrees and reinstall to outer 2.
door.
Replace 15 indented head screws removed earlier. Take 3.
care not to strip out the plastic holes.
Rotate latch strike removed earlier 180 degrees, lining 4.
single tab to thin slot and double tab to thick slot.
Reinstall 2 pan head screws removed earlier. Take care
not to strip out the plastic holes.
1
8
2
9
3
10
11
12
13
15
14
4
5
6
7
To Next Page
Loading...
