EasyManua.ls Logo

Kenmore Front Load Washer - Unpacking Washer; Removing Foam Packaging

Kenmore Front Load Washer
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
1 Temporarily remove door tape.
2 Open washer door and remove everything from the
drum.
3 Close door and reapply door tape.
4
Using a rug, blanket or piece of cardboard to protect
the oor, carefully lay the washer on its back.
Removing foam packaging
5 Remove styrofoam base and shipping plug and set
them aside.
6 Carefully return the washer to an upright position.
7 Carefully move the washer to within 4 feet (1 m) of
its nal location.
WARNING
SUFFOCATION HAZARD
Destroy the carton and plastic bags after the washer
is unpacked. Children might use them for play. Cartons
covered with rugs, bedspreads, or plastic sheets can
become airtight chambers causing su ocation. Place
all materials in a garbage container or make materials
inaccessible to children.
CAUTION
EXCESSIVE WEIGHT HAZARD
To avoid back or other injury, have more than one person
move or lift the washer.
IMPORTANT
Save styrofoam base and shipping plug for use to help
prevent washer damage during any future moves.
Unpacking Washer

Related product manuals