8
NOTE
Rubber expansion material on
spacers may need time to relax
before they can be easily pulled
through shipping hole. You may
have to exert some force to pull
out if spacer material has not yet
fully relaxed.
Removing shipping hardware
Installing hole plugs
7 HOLE PLUGS
(IN BAG)
Locate 7 hole plugs in the small bag supplied
with washer instruction guides. Insert them in the
holes in washer back panel.
5 SPACERS
5 P CLAMPS
1 SHIPPING FORK
Remove all of the following:
5 BOLTS
5 SPACERS
5 P CLAMPS
1 SHIPPING FORK
UNIVERSAL
WRENCH
(SUPPLIED)
5 BOLTS
IMPORTANT
Save all shipping bolts and spacers for future use. If the
washer is to be transported at a later date, the shipping
hardware must be reinstalled to help prevent shipping
damage.
Unpacking Washer
To Next Page
Loading...
