2-13
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can
result in death, fire, or electrical shock.
A 120 Volt, 60 Hz., AC only, 15- or 20-amp,
fused electrical supply is required. A time-
delay fuse or circuit breaker is recommend-
ed. It is recommended that a separate cir
-
cuit serving only this dryer be provided.
•
GROUNDING INSTRUCTIONS
For a grounded, cord-connected dryer:
This dryer must be grounded. In the
event of malfunction or breakdown,
grounding will reduce the risk of elec
-
tric shock by providing a path of least
resistance for electric current. This
dryer is equipped with a cord having
an equipment-grounding conductor and
a grounding plug. The plug must be
plugged into an appropriate outlet that
is properly installed and grounded in ac
-
cordance with all local codes and ordi
-
nances.
WARNING: Improper connection of the
equipment-grounding conductor can result
in a risk of electric shock. Check with a
qualified electrician or service representa-
tive or personnel if you are in doubt as to
whether the dryer is properly grounded. Do
not modify the plug provided with the dry-
er: if it will not fit the outlet, have a proper
outlet installed by a qualified electrician.
•
ELECTRICAL REQUIREMENTS
Gas Models Only
To Next Page
Loading...
Need help?
General