To Next PageTo Next Page
Need help?Do you have a question about the Kenmore Oasis 110.77052600 and is the answer not in the manual?
General| Appliance Category | Dryer |
|---|---|
| Brand | Kenmore |
| Model Number | 110.77052600 |
| Capacity | 7.0 cu. ft. |
| Control Type | Electronic |
| Lint Filter | Yes |
| Weight | 120 lbs |
| Fuel Type | Electric |
| Color | White |
| Dryer Venting | 4-Way Venting |
| Number of Cycles | 10 |
| Number of Temperature Settings | 4 |
| Energy Star Certified | No |
| Width | 27 inches |
| Height | 43 inches |
Explains safety alert symbols and warning messages for user safety.
Details on model/serial number structure and where to find labels.
Covers the one-year limited warranty, its coverage, and what is excluded.
Lists required items and site preparation for installation.
Step-by-step installation guidance and required spacing.
Instructions for connecting electric dryers via power cord or direct wiring.
Electrical specifications and safety for gas dryer models.
Details on gas supply lines and connection procedures.
Guidelines for dryer venting materials and installation for safety.
How to plan vent routes and use the system chart for optimal setup.
Procedures for connecting the dryer's exhaust vent and gas line.
Ensuring the dryer is level and performing final installation checks.
Steps for changing the direction of the dryer door swing.
Guide to starting the dryer, selecting cycles, and using basic functions.
Explains status lights, indicators, and available drying cycles.
Details on customizing cycles, using options, and the dryer rack.
Diagrams showing component placement and guides for removing electronics.
Procedures for removing moisture sensors, door switches, and drum lights.
Steps to remove heating system parts and gas burner assembly.
Instructions for removing drum, belt, motor, and blower fan assemblies.
Methods for testing door switch, thermal fuse, thermistors, and cutoff.
Procedures for testing electric heaters, gas burner coils, ignitor, flame sensor.
Testing blower motor, belt switch, drive motor, thermal overload, and centrifugal switch.
Explains error codes and how to activate diagnostic modes.
Specific diagnostic checks for console, door switch, sensor, motor, and heater.
Verifying power supply, machine control, and drive motor circuits.
Procedures for testing exhaust/inlet thermistors, thermal fuse, cut-off, and gas valve.
Electrical diagrams for electric dryer models.
Electrical diagrams and strip circuits for gas dryer models.
