To Next PageTo Next Page
Need help?Do you have a question about the Kenmore Power Miser 9 153.335916 and is the answer not in the manual?
General| Brand | Kenmore |
|---|---|
| Model | Power Miser 9 153.335916 |
| Category | Water Heater |
| Language | English |
Covers critical safety advice including proper installation, gas type, and avoiding flammable substances.
Addresses risks in areas with flammable liquids, confined spaces, and requirements for combustion air.
Details risks associated with hot water, venting systems, hydrogen gas, and insulating jackets.
Lists necessary materials for installation, such as connectors, pipes, and fittings.
Identifies essential tools for installation, including wrenches, screwdrivers, and drills.
Step-by-step guide for safely disconnecting and removing the existing water heater.
Guidance on selecting an appropriate indoor location, considering safety and clearances.
Details necessary air supply for combustion and ventilation, including clearances and vent termination.
Instructions for connecting cold and hot water lines to the water heater, including safety notes.
Explains the proper installation and function of the T&P relief valve for safety.
Procedure for filling the tank with water to prevent damage before operation.
Guides on connecting the water heater to a power source, with options for power cord or direct wiring.
Covers the installation of the vent pipe, including material, slope, and clearances.
Instructions for safely connecting the gas supply line, including sediment traps and shut-off valves.
A final checklist to ensure all installation steps and safety checks are completed before lighting.
Prerequisites for operation, including power supply, switches, and pilot status.
Describes the sequence and conditions for the burner to ignite and heat water.
Step-by-step guide for safely lighting the pilot and main burner, including safety warnings.
Essential safety information and warnings to be read before attempting to light the pilot.
Explains how to adjust the thermostat for desired water temperature and warns about scald hazards.
Procedure for removing sediment buildup from the tank to prevent damage and noise.
Annual checks for obstructions, damage, or deterioration in the venting system.
Guidance on visually inspecting the burner for sooting and cleaning if necessary.
Details on replacement information for the L.P. gas control valve and burner assembly.
Steps for draining the tank, especially for freezing temperatures or sediment removal.
Instructions for manually testing the T&P relief valve annually for proper function.
Procedure for replacing the washer in the drain valve to prevent leaks.
Recommendations for maintaining the area around the water heater and when to call for service.
Addresses issues related to initial startup, including thermal expansion and strange sounds.
Explains condensation, smoke, and odor formation, their causes, and potential fixes.
Covers common issues like smelly water, air in faucets, temperature regulation, and water supply.
Guide to identifying and correcting common sources of water leaks around the water heater.
A diagnostic flowchart for checking thermostat function and gas supply issues.
A flowchart for troubleshooting electrical components and power supply issues.
General information about the warranty coverage provided by Sears.
Details on coverage for the water heater tank, parts, and limitations for different usage types.
Information on Sears' installation warranty and policy for professional installation services.
