To Next PageTo Next PageHow to prevent thermal expansion causing premature tank failure in Kenmore POWER MISER 153.339372 Water Heater?
To prevent premature tank failure (leakage) in your Kenmore Water Heater due to thermal expansion, install a properly sized thermal expansion tank on all closed systems. This will effectively manage the harmful effects of thermal expansion.
What to do if thermal expansion causes intermittent temperature-pressure relief valve operation in my Kenmore POWER MISER 153.339372 Water Heater?
To mitigate intermittent temperature-pressure relief valve operation in your Kenmore Water Heater due to thermal expansion, it's recommended to contact your local plumbing inspector, water supplier, or the Sears Service Center for expert assistance.
Essential safety measures and warnings for proper operation and preventing hazards.
Step-by-step guide for safely igniting the pilot and main burner.
Adjusting and understanding the thermostat for desired water temperature.
A comprehensive checklist to ensure proper installation of the water heater.
Critical requirements for airflow to ensure proper combustion.
Instructions for the correct installation of the exhaust vent system.
Guidelines for connecting water supply and return lines.
Requirements and safety considerations for connecting the gas supply.
Connecting and verifying the gas source, including safety checks.
Steps and considerations for installing water supply and return piping.
Correct installation of the safety relief valve and discharge line.
General| Brand | Kenmore |
|---|---|
| Model | POWER MISER 153.339372 |
| Type | Electric Water Heater |
| Capacity | 40 gallons |
| Fuel Type | Electric |
| Voltage | 240 V |
| Wattage | 4500W |
| Warranty | 6 years |
