To Next PageTo Next PageHow to prevent premature tank failure in Kenmore POWER MISER 12 153.331572?
To prevent premature tank failure (leakage) due to thermal expansion, a properly sized thermal expansion tank should be installed on all closed systems. This will control the harmful effects of thermal expansion.
General| Brand | Kenmore |
|---|---|
| Model Number | 153.331572 |
| Type | Electric |
| Voltage | 240 V |
| First Hour Rating | 62 gallons |
| Wattage | 4500 watts |
| Recovery Rate | 21 gallons per hour |
| Warranty | 12-Year Limited Tank and Parts |
Covers safety alerts, definitions of key terms, and general precautions for safe operation.
Details risks of fire, explosion, burns from hot water, and flammable vapors.
Addresses carbon monoxide poisoning and property damage from improper installation or use.
Explains limited warranties and how to obtain service for parts and labor.
Outlines optional service plans for extended product support and benefits.
Lists user duties for safe operation, maintenance, and compliance with codes.
Presents key technical details like model numbers, capacities, and dimensions.
Lists necessary materials, basic tools, and specialized tools for installation.
Identifies major parts of the gas water heater via diagrams and labels.
A detailed list for verifying location, air supply, venting, water, and gas connections.
Provides a step-by-step guide for safely disconnecting and removing the existing unit.
Details critical requirements for selecting a safe and functional installation site.
Covers drainage, insulation, and clearance requirements for safe installation and service.
Guides on filling the tank, gas type, piping, and leak detection.
Covers gas pressure limits, leak testing, and specific safety for LP gas.
Details air requirements for different installation environments and openings.
Explains methods for supplying outdoor air and factors affecting airflow through grilles.
Covers proper installation of vent pipes, draft hoods, and connectors.
Provides instructions for connecting to chimneys and installing vertical vent systems.
Details the correct installation of water piping, including heat traps and mixing valves.
Explains thermal expansion, required tanks, and the role of the T&P relief valve.
Step-by-step instructions for safely lighting the pilot and main burner.
Guides on checking draft, burner appearance, and emergency shutdown procedures.
Instructions for adjusting the thermostat for safe and efficient water temperature.
Illustrates temperature dial positions and their relation to water temperature and burn times.
Procedures for cleaning sediment, inspecting the vent system, and checking burners.
Covers basic housekeeping, anode rod inspection, and T&P relief valve operation.
Step-by-step guide for draining and flushing the water heater tank.
Completes the draining procedure and provides contact info for repair services.
Information on ordering parts and cleaning the base-ring filter.
Detailed steps for safely removing the manifold and burner assembly.
Guides on removing the burner and replacing the thermocouple for pilot ignition.
Instructions for cleaning the combustion chamber and flame-arrestor.
Steps for correctly reinstalling the manifold/burner assembly and door.
Details the piezoelectric igniter system and its components for replacement.
Covers testing the igniter and the procedure for replacing the gas control valve/thermostat.
A checklist to verify the proper functioning of the FVIR system.
Addresses thermal expansion issues and common causes of condensation.
Explains condensation, initial smoke odors, and causes of smelly water.
Details safety shut-off mechanisms and how to identify and diagnose leaks.
Solves issues with burner ignition, flame characteristics, and hot water supply.
Addresses thermostat failures, combustion odors, and flame issues at the burner.
A step-by-step flowchart to diagnose and resolve pilot light problems.
Lists available replacement parts with corresponding model numbers for ordering.
