EasyManuals Logo

Kenmore SENSOR SMART User Manual

Kenmore SENSOR SMART
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
ENGLISH
RECESSED AREA/CLOSET
INSTALLATION INSTRUCTIONS
This dryer may be installed in a recessed
area or closet.
The dryer must not be installed where it
can be exposed to water and/or weather.
Proper operation of dryer cycles
requires temperatures above 45°F (at
lower temperatures, the dryer may not
shut off at the end of automatic cycles
and drying times will be extended).
• Use at least the minimum installation
spacings described on page 12. This
will ensure you have an adequate
clearance for service and proper opera-
tion including flow of combustion and
ventilation air, and that you have a suffi-
cient distance from combustible con-
struction.
Be sure your location allows for a
proper exhaust installation. A gas
dryer must be exhausted to the
outdoors.
See pages 18-22 for complete exhaust
requirements.
Check code requirements. Some
codes limit or do not permit installation
of clothes dryers in garages, closets,
mobile homes, or sleeping quarters.
Contact your local building inspector.
WARNING: To reduce the risk of fire,
this appliance MUST BE EXHAUSTED
OUTDOORS.
NOTE: No fuel-burning appliances may
be installed in the same closet as a dryer.
DRYER DIMENSIONS
Most installations will require at least
5-inch clearance behind the dryer for
the dryer vent.
Location must be large enough to fully
open dryer door.
43
1
2 in
14
3
16 in
27 in
28
3
8 in
8318111(v04) 3/3/00 9:56 AM Page 11

Other manuals for Kenmore SENSOR SMART

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kenmore SENSOR SMART and is the answer not in the manual?

Kenmore SENSOR SMART Specifications

General IconGeneral
BrandKenmore
ModelSENSOR SMART
CategoryDryer
LanguageEnglish

Related product manuals