Why is my Kenroy Home Outdoor Light bulb not lighting?
If your Kenroy Home Outdoor Light bulb won't light, it could be due to several reasons. First, the bulb may have burned out and needs replacement. Second, the power supply might be off, so ensure it is turned on. Third, check that the plug is fully and properly inserted into the power outlet. Lastly, the circuit breaker could be off; make sure it's in the on position.
What to do if the fuse blows in my Kenroy Home BULLETIN Outdoor Light?
If the fuse blows or a circuit breaker trips when you turn on your Kenroy Home Outdoor Light, it could be due to an exposed wire. In this case, discontinue use of the lamp. It may also be that there are too many items on one circuit, so try unplugging other items on the circuit.
Details coverage for defects in materials and workmanship for one year from purchase.
Covers defects in materials and workmanship under normal use.
Excludes damage from weathering, misuse, accidents, alterations, or improper installation.
Instructions for preparation, assembly surface, and inspection before installation.
Lists and identifies all parts included in the lamp package.
Organize parts on a flat surface and attach the lower pole to the base.
Attach the upper pole to the bottom of the socket assembly.
Thread cord through base, connect upper pole, and attach stem to socket assembly.
Place shade over stem nipple and secure with rubber washer and finial.
Install bulbs, check sockets for silica, plug in, and turn on.
Guide to shortening the pull chain length by exposing, cutting, and replacing the clip.
General| Brand | Kenroy Home |
|---|---|
| Model | BULLETIN |
| Category | Outdoor Light |
| Language | English |
To Next Page
