To Next PageTo Next PageWhy is my Kenroy Home Simplicity 30110WHWH-1 bulb not lighting?
If your Kenroy Home Outdoor Light bulb won't light, it could be due to several reasons. First, the bulb may have burned out and needs replacement. Second, the power supply might be off, so ensure it is turned on. Third, check that the plug is fully and properly inserted into the power outlet. Lastly, the circuit breaker could be off; make sure it's in the on position.
General| Brand | Kenroy Home |
|---|---|
| Model | 30110WHWH-1 |
| Category | Outdoor Light |
| Product Type | Wall Light |
| Finish | White |
| Material | Metal |
| Bulb Type | LED |
| Wattage | 9 watts |
| Dimmable | No |
| Location | Outdoor |
| Voltage | 120V |
| Color Temperature | 3000K |
Read all instructions before assembly. To avoid damaging this product, assemble it on a soft, non-abrasive surface.
Lists the specific parts included in the lamp package, such as finial, shade, harp, and lamp body.
Instructions for unpacking the lamp and removing the mounting plate by unscrewing cylinder finials.
Steps for positioning the lamp body, marking screw locations, drilling pilot holes, and attaching the mounting plate.
Procedure to raise the lamp body, align mounting screws, and secure the backplate to the wall.
Optional step for placing and securing the cord channel and covers on the wall.
Steps for assembling the shade, installing the harp, and inserting the light bulb.
Instructions for removing the power cord, wire nuts, safety knot, and grommet from the backplate.
Steps for securing the mounting plate to the outlet box using screws and the green ground screw.
Guide for connecting fixture wires to supply wires using wire nuts, matching colors and types.
Procedure to raise the lamp body, align mounting screws, and secure the backplate to the wall.
Steps for assembling the shade, installing the harp, and inserting the light bulb.
