Need help?Do you have a question about the Kenwood CS-1022 and is the answer not in the manual?
General| Brand | Kenwood |
|---|---|
| Model | CS-1022 |
| Category | Test Equipment |
| Language | English |
Precautions for power source, grounding, fuses, and voltage.
Warnings against operating in explosive atmospheres or removing covers.
Details on vertical sensitivity, bandwidth, and CRT features.
Information on sweep speed, AUTO FREE RUN, and FRAME-LINE sync.
Features like X-Y operation, CH1/VERT output, and model-specific modes.
CRT type, acceleration voltage, display area, and graticule.
Sensitivity, attenuation, impedance, frequency response, rise time, crosstalk.
Horizontal axis details and sweep types (NORM, AUTO).
Sweep time, triggering, signal output, power requirements, and dimensions.
Safety advice before operation, line voltage, power cord, fuse.
How to protect the oscilloscope from damage and ensure longevity.
Warnings regarding operation and probe compensation guidance.
POSITION, VOLTS/DIV, and VARIABLE controls for vertical settings.
Controls for trace rotation, focus, intensity, and astigmatism.
AC-GND-DC, INPUT jacks, and Channel 2 specific controls.
MODE, TRIG MODE, VARIABLE, SWEEP TIME/DIV, and related controls.
GND, PROBE ADJ, EXT TRIG INPUT, LEVEL/SLOPE controls.
Z AXIS INPUT, CH1/VERT OUTPUT, Fuse Holder.
Step-by-step guide to standardize controls and achieve normal sweep display.
Using vertical modes and basic triggering for waveform observation.
Details on CHOP/ALT modes and internal/external sync triggering.
Adjusting trigger level and understanding auto trigger functionality.
Magnified sweep, X-Y operation, and video signal observation.
Adjusting probe compensation and trace rotation for accurate measurements.
Procedure for accurately measuring DC voltage levels.
Technique for measuring peak-to-peak voltage between two points.
Using the ADD feature to cancel unwanted signal parts.
Measuring time intervals and calculating frequency from waveform period.
Measuring pulse width, risetime, and falltime.
Measuring time skew and phase difference between signals.
Using reference signals for vertical sensitivity and period calibration.
Using Lissajous patterns for phase shift analysis.
Using Lissajous patterns for frequency ratio determination.
Lists of standard and optional accessories included or available.
Step-by-step guide for installing the probe pouch.
To Next Page
