To Next Page
A
Alexandra RodgersSep 8, 2025
Why is my Kenwood Car Receiver displaying 'NO Voice Device'?
- EErika MataSep 8, 2025
The connected mobile phone does not have the voice recognition system, that's why Kenwood Car Receiver displays 'NO Voice Device'.
Why is my Kenwood Car Receiver displaying 'NO Voice Device'?
The connected mobile phone does not have the voice recognition system, that's why Kenwood Car Receiver displays 'NO Voice Device'.
Why is my Kenwood Car Receiver showing 'Authorization Error'?
Check whether the connected iPod/iPhone is compatible with this Kenwood Car Receiver.
Why is my Kenwood DDX3058 showing parking off?
No playback picture is shown on Kenwood Car Receiver when the parking brake is not engaged.
Why is my Kenwood Car Receiver not displaying a picture?
Turn on the screen of your Kenwood Car Receiver.
Why is there no sound coming from the speakers of my Kenwood Car Receiver?
Ensure the volume is at an audible level and check all speaker wire connections.
Why is my Kenwood DDX3058 Car Receiver showing no signal?
If your Kenwood Car Receiver is showing 'No Signal', start playback on the external component connected to the AV-IN input. Check the cords and connections. The signal input may be too weak.
How to fix miswiring DC offset error on Kenwood DDX3058?
If you are getting a Miswiring DC Offset Error on your Kenwood Car Receiver, it means a speaker cord has shorted or is in contact with the car chassis. Wire or insulate the speaker cord as needed, then reset the unit.
What to do if my Kenwood DDX3058 displays 'USB Device Error'?
If your Kenwood Car Receiver shows a 'USB Device Error', try turning the unit off and then on again. If the problem persists, try connecting a different USB device.
How to adjust Echo or noise that occurs on Kenwood DDX3058?
Adjust the microphone unit position.
Why is the sound interrupted while using a Bluetooth audio player on my Kenwood DDX3058 Car Receiver?
Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device connected for Bluetooth phone. Turn off, then turn on the unit. When the sound is not yet restored connect the player again.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| Power Output | 50 watts x 4 channels |
| DVD Player | Yes |
| Apple CarPlay | No |
| Android Auto | No |
| Rear View Camera Input | Yes |
| AUX Input | Yes |
| AM/FM Tuner | Yes |
| CD Playback | Yes |
| Video Output | Yes |
| Audio Formats Supported | MP3, WMA, AAC |
| Video Formats Supported | MPEG1, MPEG2, MPEG4, WMV |
| Preamp Outputs | 3 (Front, Rear, Subwoofer) |
| Display Size | 6.2 inches |
| Preamp Voltage | 4V |
