To Next PageTo Next PageHow to fix “No Signal” error on Kenwood Receiver?
If your Kenwood Receiver displays “No Signal,” start playback on the external component connected to the AV-IN input terminal. Also, check the cords and connections. The signal input may also be too weak.
Why does my Kenwood Receiver skip when using Bluetooth?
If the sound is interrupted or skipped when using a Bluetooth audio player with your Kenwood Receiver: - Reduce the distance between the unit and the Bluetooth audio player. - Disconnect any device connected for Bluetooth phone use. - Turn the unit off, then on again. - If the sound is still not restored, try reconnecting the player.
Why is there no sound from iPod/iPhone on my Kenwood DDX6031?
If you're not getting any sound from the speakers when using an iPod/iPhone with your Kenwood Receiver, try disconnecting the iPod/iPhone and then reconnecting it. If that doesn't work, select another source on the receiver and then reselect “iPod”.
What does “USB Device Error” mean on my Kenwood DDX6031?
If your Kenwood Receiver displays a “USB Device Error”, it could be due to an abnormal USB power voltage. Try turning the unit off and then on again. If that doesn't work, try connecting a different USB device to see if the issue persists.
What to do if iPod/iPhone does not work with Kenwood DDX6031?
If your iPod/iPhone is not turning on or working when connected to your Kenwood Receiver: - Check the connecting cable and its connection. - Update the firmware version. - Charge the battery. - Check whether the iPod control mode is correctly selected. - Reset the iPod/iPhone.
What to do if Kenwood Receiver does not work at all?
If your Kenwood Receiver is completely unresponsive, try resetting the unit.
Resets the unit to factory settings, excluding registered Bluetooth devices.
Explains how illustrations, symbols, and indications are used for explanation.
Guides through first-time setup or after a reset, including language and panel angle.
Allows adjustment of the monitor panel angle for optimal viewing position.
Instructions for powering the unit on.
Instructions for powering the unit off.
Controls the audio volume level for playback.
Puts the unit into a low-power state without fully shutting down.
Turns off the monitor display while audio continues.
Reduces the audio output level temporarily.
Explains touch controls for video playback and source control screens.
Lists and describes available audio/video sources like NAV, DISC, USB, iPod.
Shows how to access the control screen for the current playback source.
Details inserting, ejecting, and playback of discs.
Accesses the control screen for the current playback source.
Notes on compatibility and playback of CD-R/RW, DVD-R/-RW discs.
Details supported file types, folder limits, and backup recommendations.
Instructions for connecting USB storage devices and safe disconnection.
Selects the file type priority for playback on USB devices.
Allows switching between multiple USB devices connected via a hub.
Connects iPod/iPhone using specified cables and selects AV input settings.
Configures playback settings for iPod/iPhone when the source is selected.
Allows playback control using the iPod/iPhone interface instead of the unit.
Manages antenna extension based on source selection.
Adjusts the FM/AM tuning step interval.
Allows manual tuning and saving of radio stations to preset numbers.
Automatically searches for better traffic information reception stations.
Connects and plays external components via the AV-IN terminal.
Displays the navigation screen from a connected Kenwood navigation unit.
Instructions for exiting the navigation screen display.
Configures navigation guidance volume, mute, and setup options.
Adjusts sound equalization presets or customizes audio levels for each source.
Sets crossover frequencies for front/rear speakers and subwoofer.
Allows selection of panel illumination color and gradual color changes.
Enables custom color adjustments for background and panel colors.
Adjusts brightness, contrast, black level, color, tint, and sharpness for video.
Zooms the video picture to fit the screen or desired view.
Guides on enabling the rear view camera function.
Explains how the camera image appears when shifting to reverse.
Allows manual activation of the rear view camera display.
Assigns functions to steering wheel remote controller buttons.
Resets the steering remote controller settings to factory defaults.
Configures audio parameters like fader, balance, equalizer, loudness, and crossover.
Adjusts screen brightness, dimmer, clock display, scrolling, and panel colors.
Configures AV input sources, rear camera interrupt, and navigation settings.
Manages language, clock, beep tone, remote sensor, setup memory, and security functions.
Prevents unauthorized changes to unit settings.
Calibrates the touch screen for accurate operation.
Provides guidelines and cautions for using Bluetooth devices with the unit.
Details the pairing process for new Bluetooth phone and audio devices.
Allows modification of the default Bluetooth PIN code.
Removes paired Bluetooth devices from the unit's memory.
Manages incoming calls, displays caller information, and rejects calls.
Controls the microphone volume for hands-free calls.
Changes the call mode between handsfree and phone handset.
Allows dialing phone numbers directly using the keypad.
Enables making calls using voice commands if the phone supports it.
Filters phonebook entries by the first letter or selects others.
Selects a phone number from the list to initiate a call.
Transfers phonebook entries from a mobile phone to the unit.
Lists requirements for automatic phonebook and call list copying.
Configures settings for Bluetooth mobile phones and audio players.
Selects speakers for Bluetooth audio and phone, and configures connection.
Manages auto-response, SMS notifications, and ring tones for Bluetooth calls/messages.
Introduces the remote controller and its basic operation.
Explains how to switch modes (AUD, DVD, TV) for different functions.
Basic functions like source switching, volume control, and navigation access.
Locates specific tracks or files on DVD/VCD media.
Controls playback of DVD/VCD tracks.
Halts playback and memorizes the last stop point.
Allows direct input of track numbers for playback.
Returns to the main menu of the DVD.
Displays the DVD's specific menu options.
Switches the subtitle language for DVD playback.
Adjusts the zoom ratio of the video picture.
Cycles through available picture angles for certain discs.
Switches the audio language or voice language.
Selects folders for playback of music, audio, video, or picture files.
Selects and plays music/video from an iPod.
Selects and plays folders and files from a USB device.
Advises against using solvents and recommends soft cloth for cleaning.
Provides instructions for gently cleaning the unit's panel.
Explains causes of moisture and how to resolve it.
Guidelines for removing, storing, and handling discs properly.
Tips for cleaning dirty discs to ensure correct playback.
Addresses potential issues with new discs and how to prepare them.
Lists disc types that are incompatible or may cause playback errors.
Specifies supported DivX file extensions and audio stream requirements.
Details supported MPEG file extensions and stream formats.
Outlines supported JPEG file extensions, resolutions, and limitations.
Lists supported audio file formats, bit rates, and sampling frequencies.
Lists common error messages and their remedies.
Basic troubleshooting for sound, picture, unit, and remote controller issues.
Addresses issues related to AME presetting and radio static.
Solutions for unplayable discs, track skipping errors, and format issues.
Troubleshooting for DivX, MPEG, JPEG, MP3 file playback and external monitor issues.
Solutions for no picture or incorrect playback from AV-IN sources.
Addresses issues with USB devices, including no sound, connection errors, and reading status.
Step-by-step guide for installing the unit, including safety precautions.
Guides on mounting and connecting the Bluetooth microphone.
Details screen size, display system, pixels, and backlighting.
Specifies D/A converter, audio/video decoders, frequency response, and distortion.
Lists frequency range, sensitivity, S/N ratio, and stereo separation for FM reception.
Details frequency range and sensitivity for AM and LW reception.
Specifies color system and input levels for external video sources.
Lists power output, preout level, speaker impedance, and tone controls.
Covers operating voltage, current consumption, dimensions, temperature, and weight.
Lists technical specifications for the Bluetooth adapter, including version and power.
General
