To Next PageTo Next Page
Need help?Do you have a question about the Kenwood DDX6034 and is the answer not in the manual?
General| Touchscreen | Yes |
|---|---|
| DVD Player | Yes |
| Bluetooth | Yes |
| USB | Yes |
| iPod Control | Yes |
| GPS Navigation | Yes |
| Display Resolution | 800 x 480 pixels |
| AUX Input | Yes |
| CD Playback | Yes |
| AM/FM Tuner | Yes |
| Steering Wheel Control | Yes |
| Screen Size | 6.1 inches |
Describes components within the Video Control Unit, detailing their application and operation.
Lists components and functions for the Switch Unit.
Details components and operations for the Sub-Circuit Unit.
Describes components and functions of the Control Circuit Unit.
Lists components and functions for the Electric Unit.
Details components and operations for the Video Unit.
Details components and operations for the DVD Unit.
Clarifies necessary information on the Test mode used at production and service.
Details the two approaches to transfer the system into Test mode.
Describes the transition from Test Mode Main screen to other screens.
Details the functions available in each Test mode screen.
Describes keys used to transfer to each screen and display contents.
Displays version number and other system conditions.
Provides various service information and initialization options.
Screen for entering the serial number of each set.
Performs adjustment of the memorized Mute Level for Tuner F/E.
Fine-tunes touch feeling by adjusting four markers.
Performs adjustment of white color used for Key Illumi.
Used to perform adjustment of the LCD.
Used to perform adjustment of the Flicker.
Used to perform adjustment of the Panel Mechanism.
Performs LOOPBACK test with other Bluetooth device.
Specifies hard key behavior and multiple pressing key operations in Test mode.
Lists remote controller key specifications for various functions.
Describes CDDA check and DVD audio/video checking procedures.
Adds [V-Play] key and describes iPod authentication check.
Details test mode settings for audio items and key operations.
Clears non-volatile memory contents like DC Offset, Memory, Retailer mode, Service.
Checks software versions by comparing files on USB.
Details the procedure to clear the Security Code when the unit is started with Security ON.
Performs automatic adjustment for VCOM, AGC, WB, and HPOSI.
Adjusts screen position and touch panel operation.
Adjusts flicker amplitude to the minimum.
Performs adjustment of white color for Key Illumi.
Lists parts for the Video Control Unit, including component references and destinations.
Lists parts for the Switch Unit.
Lists parts for the Sub-Circuit Unit.
Lists parts for the Electric Unit, including component references and destinations.
Lists parts for the Control Circuit Unit.
Lists parts for the Video Unit.
Lists parts for the DVD Mechanism.
Lists components for the DVD Mechanism Assembly.
Details picture size, display system, pixels, and backlighting.
Details D/A converter, audio/video decoders, and frequency response.
Details USB standard, file system, and power supply.
Details Bluetooth technology, frequency, output power, and communication range.
Specifies frequency range, usable sensitivity, and S/N ratio.
Details graphics equalizer, X'over settings, and frequency response.
Details receiver, reception frequency, acquisition times, and accuracy.
Details operating voltage, current consumption, dimensions, temperature, and weight.
Specifies laser wavelength and power class.
Details file system and capacity for SD card interface.
Details Bluetooth technology, frequency, output power, and communication range.
Details graphics equalizer and X'over settings.
Details receiver, reception frequency, acquisition times, and accuracy.
