Why is the radio reception poor on my Kenwood DNX773S?
- SSharon MackAug 9, 2025
If you are experiencing poor radio reception with your Kenwood GPS, make sure the car antenna is fully extended. This should improve the signal quality.
Why is the radio reception poor on my Kenwood DNX773S?
If you are experiencing poor radio reception with your Kenwood GPS, make sure the car antenna is fully extended. This should improve the signal quality.
What to do if there is no output from the subwoofer of Kenwood DNX773S GPS?
If there is no output from the subwoofer of your Kenwood GPS, the subwoofer might not be activated. Ensure that the subwoofer is set to the 'on' setting.
Why I cannot adjust the volume of the rear speakers on my Kenwood DNX773S?
If you cannot adjust the volume of the rear speakers on your Kenwood GPS, the dual zone function might be disabled. Enable the dual zone function to adjust the rear speaker volume.
What to do if I cannot select the output destination of the subsource in the dual zone of Kenwood DNX773S?
If you cannot select the output destination of the subsource in the dual zone on your Kenwood GPS, the dual zone function may be disabled. Ensure the dual zone function is enabled.
General safety warnings and important information before operating the navigation system.
Detailed explanation of the buttons on the front panel for different models.
Basic operations and steps to use the navigation system.
Configuration options for the navigation system.
How to search for music or video files using different methods.
Core operations for using SiriusXM satellite radio service.
Steps for registering and connecting a Bluetooth device.
Using the telephone functions via Bluetooth connection.
Adjusting image quality settings for the monitor.
General system configuration options.
Setting up security features to protect the unit.
Configuring camera parameters for parking assistance.
Setting parameters related to the navigation system.
Setting up speakers and crossover frequencies for optimal sound.
Common issues and their solutions for unit operation.
Explains error messages and how to resolve them.