To Next PageTo Next PageWhy is sound interrupted while playing a track on Kenwood DDX630W Car Video System?
If sound is sometimes interrupted while playing a track on your Kenwood Car Video System, the tracks may not be properly copied into the USB device. Copy the tracks again and try again.
What does 'Reading...' flashing mean on Kenwood DDX630W?
If “Reading...” keeps flashing on the screen of your Kenwood Car Video System, turn the power off and on again.
Why can't I play videos on my Kenwood DDX630W?
If videos cannot be played or there is no sound from videos on your Kenwood Car Video System, connect USB Audio and Video cable KCA-iP202, as other cables cannot be used. Select for .
How to synchronize sound with video on Kenwood DDX630W?
If the sound does not synchronize with the video on your Kenwood Car Video System, select for .
Why are no operations available when playing back a track containing Artwork on Kenwood Car Video System?
When playing back a track containing Artwork on your Kenwood Car Video System, operate the unit after the Artwork is loaded if no operations are available.
How to reduce noise on Kenwood Car Video System with iPod?
If a lot of noise is generated by your Kenwood Car Video System, turn off (uncheck) the 'VoiceOver' feature of the iPod.
Why is the sound distorted on my Kenwood DDX630W?
If the sound is distorted on your Kenwood Car Video System, deactivate the equalizer either on the unit or the iPod/iPhone.
What to do if iPod/iPhone does not work with Kenwood DDX630W Car Video System?
If your iPod or iPhone does not turn on or work with your Kenwood Car Video System, check the connecting cable and its connection. Update the firmware version. Charge the battery. Check whether the iPod control mode is correctly selected and reset the iPod or iPhone.
Why is there no sound from my Kenwood Car Video System when using iPod?
If no sound comes out of the speakers when using an iPod or iPhone with your Kenwood Car Video System, disconnect the iPod or iPhone and then connect it again. Alternatively, select another source and then reselect 'iPod'.
Why is there no picture on the screen of my Kenwood DDX630W Car Video System?
If no picture appears on the screen of your Kenwood Car Video System, turn on the video component if it is not on. Also, connect the video component correctly.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| DVD Player | Yes |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Rear View Camera Input | Yes |
| AM/FM Tuner | Yes |
| Navigation | Optional |
| Video Output | Yes |
| Preamp Outputs | 3 Pairs (Front, Rear, Subwoofer) |
| Max Power Output | 50 Watts x 4 Channels |
| Steering Wheel Control | Yes |
| Preamp Voltage | 4V |
| RMS Power Output | 22W x 4 |
| Display Size | 6.2 inch |
Explains the procedure to reset the unit to factory settings.
Provides guidance on interpreting the manual's symbols and conventions.
Guides through the initial setup process upon first use or after a reset.
Allows users to change the angle of the monitor panel for optimal viewing.
Explains how to update the unit's system software using a USB device.
Details how to set a security code to protect the system against theft.
Details the functions of buttons and indicators on the touch panel screen.
Explains the functions of the buttons located on the monitor panel.
Covers turning the unit on, off, and placing it into standby mode.
Details volume control and sound attenuation features.
Describes how to display and use the source control screen.
Explains touch gestures for navigation and playback control.
Guides users on how to choose different audio/video sources.
Instructions on how to show the source control screen for active sources.
Details how to insert, play, and eject discs.
Specific playback controls for various media formats.
How to navigate and select files from a list view.
Details how to select different playback modes like repeat and random.
How to play music and video files from a USB storage device.
Steps for connecting and safely removing USB devices.
Adjusts aspect ratio for video display on external monitors.
Configures the unit to prioritize specific file types for USB playback.
Selects internal or external memory for connected devices.
Steps and cables needed before connecting an iPod/iPhone.
Configuration options for iPod playback mode and artwork display.
How to set the AV input for iPod/iPhone when the unit is in standby.
Step-by-step guide to browse and select content via the iPod/iPhone interface.
How to use the iPod/iPhone directly for playback control.
Explains text info, indicators, and preset buttons for radio.
Covers mode selection, TI, and Mono settings for radio tuning.
How to view detailed information about the currently tuned radio station.
Configures automatic antenna control and tuner channel interval.
Guide to saving favorite radio stations for quick access.
How to search for radio programs based on PTY codes.
Manages Traffic Information and News Standby Reception features.
How the unit retunes to stronger signals for uninterrupted program reception.
Enables automatic search for better traffic information reception.
How to change the display name for AV-IN sources.
Connects and plays audio/video from external components via AV-IN.
Steps to access and display the navigation screen.
Procedure to exit the navigation display.
Configuration options for the connected navigation unit.
Adjusts equalizer settings for different sound modes.
How to choose from predefined sound profiles.
How to save custom sound settings and tone configurations.
Fine-tunes audio levels for each frequency band and subwoofer.
Configures crossover frequencies for speakers and subwoofer.
How to choose a color for the unit's illuminated buttons.
Steps to create custom color schemes for the display.
How to set a custom image as the display background.
Captures and sets an image as the unit's background.
Fine-tunes brightness, contrast, color, and sharpness.
Controls screen brightness based on external signals.
Adjusts the display's aspect ratio for different video sources.
Allows zooming in on the video image.
Steps to enable the rear view camera function.
How to access and turn off the rear view camera display.
How to assign unit functions to steering wheel buttons.
Resets steering remote control settings to factory defaults.
Configures speaker balance and auto-volume levels per source.
Adjusts sound equalization and preset sound modes.
Configures crossover frequencies, subwoofer, and speaker size.
Adjusts dimmer, background, panel color, and screen settings.
Configures OSD clock and menu display options.
Determines use of AV-IN terminal for external components or iPod.
Activates rear camera display upon shifting to reverse.
Allows changing navigation system settings.
Sets display language, clock time, and beep tones.
Manages security codes, setup memory, and system information.
Calibrates touch panel and assigns steering remote functions.
Saves and retrieves customized settings for the unit.
Prevents unintended changes to unit settings.
Calibrates the touch panel for precise input response.
General precautions and compatibility notes for Bluetooth devices.
Introduces Bluetooth technology and preparation steps.
Steps for first-time pairing of phones and audio players.
Covers changing the Bluetooth PIN code.
Manages existing Bluetooth connections, including pairing.
How to remove previously paired Bluetooth devices.
Handling incoming, ongoing, and outgoing calls via Bluetooth.
Adjusts mic volume and handles SMS notifications.
Dialing numbers directly and selecting call methods.
Using voice commands to initiate phone calls.
Views outgoing, incoming, and missed calls.
Accessing phonebook, details, search, and initiating calls.
Saving frequently used numbers for quick dialing.
Transferring contacts from a mobile phone to the unit.
Removing contacts and call history from the unit's memory.
Information on phone compatibility for automatic phonebook transfer.
Displays track info, playback status, and battery.
Connect, disconnect, auto-connect, and initialize Bluetooth settings.
Manages auto-response, SMS notifications, and ring tones.
Introduces the remote controller, its use, and safety warnings.
Instructions for installing batteries and understanding mode switch functions.
Covers source switching, volume, and navigation.
Explains ENTER, hands-free, Function, MODE, and OPEN buttons.
Controls for searching tracks, playing, pausing, and stopping discs.
Searching content by number and accessing DVD menus.
Controls for subtitle language, zoom ratio, picture angle, and voice.
How to search for music, audio, video, or picture files.
Covers band switching, station selection, seek modes, and direct tuning.
Search and play music/videos from iPod devices.
Search and play files/folders from USB devices.
Guidelines for cleaning the unit and handling moisture condensation.
Best practices for discs and lists incompatible types.
Details on DivX, MPEG, and JPEG file format support and requirements.
Specifications for MP3, WMA, WAV, and AAC file formats and bitrates.
Explains audio output signals and downmixing for multi-channel discs.
Lists language codes used for DVD and DivX language selection.
Lists error messages and their corresponding remedies.
Solutions for unit, speaker, and radio reception issues.
Troubleshooting playback for discs and various digital file formats.
Solutions for issues with external sources and video inputs.
Resolving problems with iPod/iPhone connection and playback.
Troubleshooting USB connection and playback errors.
Solutions for poor phone sound, interrupted audio, echo, and noise.
Troubleshooting device detection, pairing, and phonebook copy issues.
Lists the items included with the unit for installation.
Step-by-step instructions for installing the unit in a vehicle.
Critical safety warnings related to electrical connections during installation.
Post-installation steps and professional advice.
Instructions for removing installation screws.
Warnings about cooling fan blockage and heat during operation.
Connects steering remote, microphone, reverse, and parking sensors.
Connects power, ground, mute control, and audio preouts.
Details wire colors and their corresponding functions.
Shows the location of the USB connection terminal.
Shows the connection for AV input 2, supporting iPod.
Connects optional navigation units and rear view cameras.
Details audio output and input connections.
Specific instructions for installing the unit with car brackets.
Steps for mounting and wiring the Bluetooth microphone.
Details of the unit's display, panel, and DVD player capabilities.
Technical details for USB interface and Bluetooth functionality.
Details FM/AM tuner and video input/output specifications.
Covers audio output, impedance, and general unit specifications.
User guide for the KS-UBT1 Bluetooth adapter.
Technical details of the Bluetooth adapter.
