Why is the Kenwood DNX5160BTS navigation system radio reception poor?
If you're experiencing poor radio reception with your Kenwood Gps navigation system, make sure the car antenna is fully extended. Also, verify that the antenna control wire is correctly connected, referring to the “Connection” section in the Quick Start Guide.
Why I cannot set up the equalizer on my Kenwood Gps navigation system?
If you cannot set up the equalizer on your Kenwood Gps navigation system, it might be because the dual zone function is enabled. To resolve this, set the dual zone function to off, referring to Zone Control (P.94).
Why I cannot set up the crossover network on my Kenwood DNX5160BTS navigation system?
If you cannot set up the crossover network on your Kenwood Gps navigation system, it might be because the dual zone function is enabled. To resolve this, set the dual zone function to off, referring to Zone Control (P.94).
What to do if I cannot select the output destination of the subsource in the dual zone on Kenwood Gps navigation system?
If you're unable to select the output destination of the subsource in the dual zone on your Kenwood Gps navigation system, the dual zone function may be disabled. Enable the dual zone function by referring to Zone Control (P.94).
What to do if I cannot adjust the volume of the rear speakers on Kenwood DNX5160BTS GPS navigation system?
If you're unable to adjust the volume of the rear speakers on your Kenwood Gps navigation system, the dual zone function might be disabled. Enable the dual zone function by referring to Zone Control (P.94).
What to do if there is no output from the subwoofer of Kenwood DNX5160BTS GPS navigation system?
If there is no output from the subwoofer of your Kenwood Gps navigation system, it might be because the subwoofer is not set to on. To resolve this, set the subwoofer to on, referring to Speaker/ X’over setup (P.88).
Why is the radio reception poor on my Kenwood DNX5160BTS?
If you are experiencing poor radio reception with your Kenwood GPS, make sure the car antenna is fully extended. This should improve the signal quality.
What to do if there is no output from the subwoofer of Kenwood DNX5160BTS?
If there is no output from the subwoofer of your Kenwood GPS, the subwoofer might not be activated. Ensure that the subwoofer is set to the 'on' setting.
Why I cannot adjust the volume of the rear speakers on my Kenwood DNX5160BTS?
If you cannot adjust the volume of the rear speakers on your Kenwood GPS, the dual zone function might be disabled. Enable the dual zone function to adjust the rear speaker volume.
What to do if I cannot select the output destination of the subsource in the dual zone of Kenwood DNX5160BTS GPS?
If you cannot select the output destination of the subsource in the dual zone on your Kenwood GPS, the dual zone function may be disabled. Ensure the dual zone function is enabled.
Important safety warnings and precautions for unit usage, handling, and disc management.
Details and functions of each button on the unit's front panel.
Guide for the initial setup process after the unit is first turned on.
How to choose and switch between different media sources on the HOME screen.
Switching between navigation view and audio control screens.
Steps to prepare and connect an Android device for screen mirroring.
Setting up your iPhone and connecting it for Apple CarPlay functionality.
Setting up your Android device and connecting it for Android Auto functionality.
Understanding the basic operation and display elements of the tuner.
Getting started with SiriusXM, including subscription and basic controls.
Steps to register and connect Bluetooth-enabled phones and audio players.
Basic operations for playing music via Bluetooth, including controls and information display.
Instructions for initiating calls and managing incoming calls.
Setting up screen brightness, angle, and front/rear camera views.
Adjusting system parameters and user interface elements like language and clock.
Setting up rear camera interruption, parking guidelines, and front camera options.
Configuring speaker types, positions, and crossover frequencies for optimal sound.
Guidance for resolving issues with settings, audio, and disc playback.
General| MP3 playback | Yes |
|---|---|
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Image formats supported | BMP, JPEG XR, PNG |
| Video formats supported | H.264, MKV, MPEG1, MPEG2, MPEG4, WMV |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | AM, FM, LW, MW |
| Preset stations quantity | 20 |
| DIN size | 2 DIN |
| Output power | 200 W |
| RDS features | AF, TP |
| Product color | Black |
| Volume control | Digital |
| DVD region code | 2 |
| Frequency range | 20 - 44000 Hz |
| Disc types supported | CD, CD-DA, CD-R, CD-RW, DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Equalizer bands quantity | 13 |
| Signal-to-Noise Ratio (SNR) | 98 dB |
| Mobile operating systems supported | Android, iOS |
| Display type | LCD |
| Display diagonal | 6.2 \ |
| Display resolution | 800 x 480 pixels |
| Number of OSD languages | 21 |
| On Screen Display (OSD) languages | ARA, CHI (SIMPL), CZE, DEU, DUT, ENG, ESP, FRE, GRE, HEB, HUN, IND, ITA, KOR, MSA, PER, POL, POR, RUS, THA, TUR |
| USB version | 2.0 |
| Bluetooth version | 3.0+HS |
| Bluetooth profiles | AVRCP, GAP, HID, SPP, SSP |
| Line outputs (RCA) | 3 |
| USB ports quantity | 1 |
| Bluetooth functions | Audiostreaming, Handsfree calling |
| Compatible memory cards | SD, SDHC |
| Cables included | AV, DC |
| File format system | FAT32/NTFS |
| Number of optical discs | 1 discs |
| Package weight | 3000 g |
| Operating temperature (T-T) | -10 - 60 °C |
Weight and Dimensions| Weight | 2100 g |
|---|---|
| Dimensions (WxDxH) | 182 x 112 x 153 mm |
To Next Page
