K
Kelli CookSep 16, 2025
What does No Media file mean on my Kenwood GPS?
- FfernandezdavidSep 16, 2025
The message “No Media file” indicates that the connected USB device contains no playable audio file. Try another USB device.
What does No Media file mean on my Kenwood GPS?
The message “No Media file” indicates that the connected USB device contains no playable audio file. Try another USB device.
What to do if Kenwood DNX535VBT radio reception is poor?
If you're experiencing poor radio reception with your Kenwood GPS, make sure the car antenna is fully extended. Also, check that the antenna control wire is correctly connected.
What does Error Message Protect mean on my Kenwood DNX535VBT?
The “Error Message Protect” indicates that the protective circuit has been activated because a speaker cord has shorted or is in contact with the car chassis. You should wire or insulate the speaker cord as needed and then push the Reset button.
What does Mecha Error mean on my Kenwood DNX535VBT GPS?
A “Mecha Error” indicates that the disc player is malfunctioning. Eject the disc and try inserting it again. If the error continues or the disc cannot be ejected, contact the Kenwood dealer.
What does Disc Error mean on my Kenwood DNX535VBT?
A “Disc Error” message means that an unplayable disc has been inserted. Try changing the disc.
What does No Device mean on my Kenwood DNX535VBT?
The message “No Device” means that the USB device is selected as a source although no USB device is connected. Change the source to any source other than USB/iPod. Connect a USB device, and change the source to USB again.
What does Region Code Error mean on my Kenwood GPS?
A “Region Code Error” indicates that the disc you are trying to play has a region code that is not compatible with the unit. Try another disc.
What does Parental Level Error mean on my Kenwood DNX535VBT?
A “Parental Level Error” indicates that the disc you are trying to play has a higher level than the parental level you have set. Set the parental level.
Why can't I set up the low pass filter on my Kenwood DNX535VBT GPS?
If you cannot set up the low pass filter, it may be because the subwoofer is not turned on. Set the subwoofer to on.
Why is there no output from the subwoofer on my Kenwood GPS?
If there is no output from the subwoofer, it may not be turned on. Set the subwoofer to on.
General| Display Type | WVGA |
|---|---|
| Display Resolution | 800 x 480 pixels |
| Touchscreen | Yes |
| Bluetooth | Yes |
| Navigation | Yes |
| Map Coverage | North America |
| Audio Formats Supported | MP3, WMA, AAC, WAV |
| USB Port | Yes |
| SD Card Slot | Yes |
| DVD Player | Yes |
| iPod/iPhone Compatibility | Yes |
| Rear View Camera Input | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| AM/FM Tuner | Yes |
| Voice Control | Yes |
| Steering Wheel Control | Yes |
| GPS Navigation | Yes |
| Video Formats Supported | MPEG-1, MPEG-2 |
