A
amy64Sep 15, 2025
What to do if Kenwood DNX5330BT GPS cannot set up the high pass filter?
- Aallison97Sep 15, 2025
To set up the high pass filter on your Kenwood GPS, set the dual zone function to off.
To Next PageTo Next PageWhat to do if Kenwood DNX5330BT GPS cannot set up the high pass filter?
To set up the high pass filter on your Kenwood GPS, set the dual zone function to off.
Why Kenwood GPS cannot play audio files stored in a disc?
If your Kenwood GPS cannot play audio files stored on a disc, it might be because “CD Read” is set to “2”. Set “CD Read” to “1”.
How to fix Kenwood GPS Navigation Error?
A 'Navigation Error' on your Kenwood GPS, with the message 'Please turn on power again later,' indicates a communication error due to severely cold temperature. Turn on the power again after warming your car's interior.
What to do if Kenwood DNX5330BT says Protect Error Message?
If you see a 'Protect Error Message' on your Kenwood GPS, it means the protective circuit has been activated because a speaker cord has shorted or come into contact with the car chassis. You should wire or insulate the speaker cord as needed and then push the Reset button.
Why is Kenwood DNX5330BT radio reception poor?
Poor radio reception on your Kenwood GPS could be due to a couple of reasons: * The car antenna may not be fully extended, so pull it out all the way. * The antenna control wire might not be connected properly; ensure it is correctly connected.
What to do if there is no output from the Kenwood GPS subwoofer?
To get output from the subwoofer on your Kenwood GPS, set the subwoofer to on.
What to do if Kenwood DNX5330BT cannot set up the subwoofer?
If you cannot set up the subwoofer on your Kenwood GPS, the subwoofer may not be set to on. Set the subwoofer to on.
What to do if Kenwood DNX5330BT GPS cannot set up subwoofer phase?
To set up the subwoofer phase on your Kenwood GPS, set the dual zone function to off.
What does USB Device Error mean on Kenwood DNX5330BT GPS?
A 'USB Device Error' on your Kenwood GPS means that the connected USB device requires more current than the allowable limit. Check the USB device; there may be an issue with it.
What to do if Kenwood GPS says No Device Error?
If your Kenwood GPS shows a 'No Device Error', it means the USB device is selected as a source, but no USB device is connected. Change the source to something other than USB/iPod. Then, connect a USB device and switch the source back to USB.
General| Resolution | 800 x 480 pixels |
|---|---|
| Bluetooth | Yes |
| Navigation | Yes |
| Audio Formats Supported | MP3, WMA, AAC, WAV |
| Touchscreen | Yes |
| DVD Player | Yes |
| USB | Yes |
| SD Card Slot | Yes |
| iPod/iPhone Compatibility | Yes |
| GPS Navigation | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| DVD Playback | Yes |
| CD Playback | Yes |
| AM/FM Tuner | Yes |
| Steering Wheel Control Compatibility | Yes |
| Voice Control | Yes |
| Map Updates | Yes |
| Video Formats Supported | MPEG-1, MPEG-2, WMV |
| Display Size | 6.1 inch |
Explains how to navigate and understand the manual's structure and content.
Explains the function of each button on the unit's front panel.
Describes the procedure for removing and attaching the front panel of the unit.
Step-by-step instructions for inserting a microSD card into the unit.
Explains how to turn the unit on and perform initial setup.
Instructions for playing music CDs, disc media, USB devices, and iPods.
Explains how to navigate and use the main menu screen.
Introduces common functions and operations applicable across most screens.
Describes common function keys used in list screens.
Explains how to scroll list screens by flicking.
Instructions for displaying the navigation screen on the unit.
How to control audio sources while viewing the navigation screen.
Details information display and multi-function keys for DVD/VCD playback.
Explains sub-function menus, search, and menu display areas for playback.
How to control DVD menus directly on the screen using highlight control.
Allows selection of DVD playback modes.
Explains how to enlarge the playback screen for DVD and VCD.
Configures menu, subtitle, audio language, and dynamic range.
Adjusts angle, screen ratio, parental level, and disc setup.
Configures CD read mode and on-screen display for discs.
Covers information display, multi-function keys, and control switching.
Details sub-function menus, file searching, and menu/key displays.
Explains information display and control switching for USB/iPod.
Details multi-function keys, content lists, and file searching.
Lists available functions for Music CD, iPod, and USB device.
Details functions available in the sub-function menu.
Explains how to search for music, video, or picture files.
Details category and link search methods for USB and iPod.
Describes how to search folders and pictures on USB/disc.
How to search music files using album artwork.
How to create a playlist of favorite albums.
Adjusts movie playback settings from disc media.
Lists functions available for Pandora operation.
Details sub-function menu options for Pandora.
Allows selection of connected devices for Pandora reception.
Explains how to view and select stations and genres.
Lists available functions for Aha operation.
Details sub-function menu options for Aha.
Allows selection of connected devices for Aha reception.
Explains how to select stations and use navigation features.
Configures settings for USB device and iPod connection.
Manages DivX Video-on-Demand registration and deactivation.
Covers information display, multi-function keys, and preset management.
Details multi-function and sub-function menus for radio tuning.
Covers artwork, multi-function keys, and lists.
Details tuning, sub-function menus, and signal information.
Covers information display, multi-function keys, and presets.
Details channel/band switching and menu options.
Explains automatic and manual storage of stations/channels.
Describes how to select memorized stations or channels.
How to select lists and search by program type.
Explains traffic information and replay functions for digital radio.
Configures tuner parameters like regional settings and language.
Configures digital radio settings like PTY Watch and Seamless Blend.
Manages announcement services for digital radio.
Configures TV receiving areas and on-screen display.
Steps to register Bluetooth audio players and cell-phones.
How to connect registered Bluetooth devices and set profiles.
Basic operation for playing audio via Bluetooth.
Explains how to use the telephone function via Bluetooth.
How to answer or reject incoming calls.
How to register frequently used phone numbers.
How to view received and sent SMS messages.
How to compose and send SMS messages using templates or direct entry.
Accesses cell-phone voice recognition for phonebook searches.
Receives traffic and weather info from Android smartphone.
Configures phone info usage, SMS beep, and sort order.
Configures Bluetooth audio output, auto response, and pairing.
Adjusts screen modes, brightness, tint, color, contrast, and sharpness.
Configures dimmer modes for the display and buttons.
Configures UI elements like beep, language, and touch panel.
Sets security codes and manages setup memory.
Enables prayer display and Quran playback on startup.
Adjusts touch panel sensitivity and sets up system security.
Manages memorized audio/AV settings, allowing recall and locking.
Adjusts the monitor's viewing angle and saves settings.
Sets screen and button illumination colors.
Loads and sets custom images as the background.
Configures navigation voice guidance and volume.
Configures parameters for front and rear cameras.
Displays software version and configures AV input sources.
Selects AV sources for the AV output port.
Selects speaker types and sizes for optimal sound.
Adjusts fader, balance, volume offset, and other audio parameters.
Sets crossover frequencies for speakers.
Configures car type and speaker locations for audio optimization.
Selects whether to use the DSP system.
Controls fader, balance, volume offset, and bass boost.
Manually adjusts equalizer settings using graphic equalizer.
Selects EQ curves and controls SystemQ-Ex for tone setup.
Fine-tunes equalizer settings for bass, middle, and treble.
Selects audio sources for front and rear positions.
Enhances soundscape and boosts frequencies affected by road noise.
Adjusts sound position and restores lost audio quality.
Fine-tunes listening position by adjusting delay time and gain.
Explains the functions of remote control buttons and operation modes.
Instructions for installing batteries in the remote control.
Details the name, location, and function of each remote control button.
Lists common problems and their solutions across settings and audio.
Explains error messages, their causes, and solutions.
Details causes and solutions for specific error messages.
Instructions for resetting the unit to factory settings.
Lists playable disc types and their support status.
Details supported audio, video, and picture file formats.
Lists compatible iPod/iPhone models and USB device requirements.
Explains the indicators displayed on the unit's status bar.
Provides detailed explanations of status bar indicators.
Maps DVD region codes to countries and explains disc marks.
Lists language codes for DVD menus and audio.
Provides detailed technical specifications for the unit.
Details specifications for DSP, FM tuner, AM tuner, and Digital Radio.
Lists specifications for antenna, navigation receiver, and audio components.
Lists copyright information and trademarks for various technologies.
Outlines requirements for using Pandora and Aha services.
Explains the Class 1 Laser Product label.
Provides conformity declarations and regional compliance information.
