To Next PageTo Next PageWhy is the Kenwood GPS radio reception poor?
Poor radio reception in your Kenwood GPS could be due to a couple of reasons. First, make sure the car antenna is fully extended. Also, check that the antenna control wire is properly connected.
Why can't I set up the equalizer on my Kenwood DNX571EX GPS?
If you're having trouble setting up the equalizer on your Kenwood GPS, it might be because the dual zone function is currently enabled. Try turning the dual zone function off.
Why can't I adjust the volume of the rear speakers on my Kenwood GPS?
If you can't adjust the volume of the rear speakers on your Kenwood GPS, the dual zone function may be disabled. To resolve this, set the dual zone function to 'on'.
Why can't I set up the crossover network on my Kenwood DNX571EX GPS?
If you're unable to set up the crossover network on your Kenwood GPS, it could be because the dual zone function is enabled. You should set the dual zone function to 'off'.
Why can't I set up the low pass filter on my Kenwood DNX571EX?
If you're unable to set up the low pass filter on your Kenwood GPS, ensure that the subwoofer is set to 'on'.
Why can't I set up the high pass filter on my Kenwood DNX571EX GPS?
If you're having trouble setting up the high pass filter on your Kenwood GPS, the problem might be that the subwoofer is not turned on. Set the subwoofer to 'on'.
Why can't I select the output destination of the subsource in the dual zone on my Kenwood DNX571EX GPS?
If you're unable to select the output destination of the subsource in the dual zone on your Kenwood GPS, it's possible that the dual zone function is disabled. Set the dual zone function to 'on'.
What to do if I cannot set up the Kenwood GPS subwoofer?
If you are unable to set up the subwoofer on your Kenwood GPS, it might be because the subwoofer is not turned on. Make sure to enable the subwoofer in the settings.
What to do if there is no output from the Kenwood GPS subwoofer?
If there is no output from the subwoofer of your Kenwood GPS, the subwoofer may not be activated. Ensure that the subwoofer is set to 'on'.
Why I cannot set up the low pass filter on my Kenwood GPS?
If you cannot set up the low pass filter on your Kenwood GPS, it is probably because the subwoofer is not turned on. Ensure that the subwoofer is activated.
General| Bluetooth | Yes |
|---|---|
| Apple CarPlay | Yes |
| Android Auto | Yes |
| USB Ports | 1 |
| HD Radio | Yes |
| SiriusXM Ready | Yes |
| Rear View Camera Input | Yes |
| Preamp Outputs | 3 Pairs (Front, Rear, Subwoofer) |
| Touchscreen | Yes |
| Built-in Microphone | Yes |
| Steering Wheel Control Compatible | Yes |
| Display Resolution | 800 x 480 pixels |
| Audio Formats Supported | MP3/WMA/AAC/WAV/FLAC |
| Video Formats Supported | MPEG1/MPEG2/MPEG4/WMV |
Safety warnings and important guidelines for using the unit.
Initial setup procedures for the unit upon first use.
Overview of the physical buttons and their functions on the unit.
General functions applicable across most screens for user interaction.
Step-by-step guide on operating the GPS navigation system.
Instructions for playing audio files from various media sources.
Steps for making and receiving calls using the Bluetooth hands-free function.
Guidelines and precautions for installing the unit in a vehicle.
Fundamental operations for playing DVD and VCD media.
How to navigate and use the menu options on a DVD disc.
Settings for various DVD playback functions like language and screen ratio.
Fundamental operations for playing music, video, and picture files.
Methods for searching music, video, or picture files by various criteria.
How to listen to Pandora through the unit's application control.
How to listen to iHeartRadio through the unit's application control.
Instructions for using applications on iPod touch/iPhone or Android.
Setup procedures for USB, iPod, and DivX media playback.
Fundamental operations for tuning and controlling radio stations.
How to store and recall radio stations in memory.
Methods for selecting stations via preset list or program type search.
Tuning stations by entering frequency or channel number directly.
How to receive and view traffic information broadcasts.
Fundamental operations for controlling SiriusXM satellite radio.
How to store and recall SiriusXM channels in memory.
Methods for selecting SiriusXM channels via presets or search.
Setting alerts for registered artists, songs, or teams.
Replaying the last 60 minutes of current SiriusXM channel audio.
System setup options specific to SiriusXM functionality.
Steps to register and connect Bluetooth audio players or cell-phones.
How to play audio from a connected Bluetooth device.
Using the unit for hands-free phone calls via Bluetooth.
Receiving traffic and weather data via a smartphone application.
Configuring settings for the hands-free phone function.
Adjusting image quality for iPod video, picture files, and menu screens.
Setting up display parameters for connected view cameras.
Configuring core system parameters like user interface and security.
Customizing interface parameters such as beep, language, and text scroll.
Selecting languages for menu, subtitle, voice, and keyboard.
Calibrating the touch panel for accurate input response.
Setting the screen and button illumination colors and scanning.
Configuring navigation system parameters like voice guidance and volume.
Setting camera parameters for rear and front camera types and interruption.
Adjusting speaker output, car type, and DSP settings for optimal sound.
Selecting speaker types and sizes to optimize sound effects.
Setting crossover frequencies for speakers to manage audio ranges.
Configuring settings based on the vehicle type for network optimization.
Adjusting general audio settings like fader, balance, and subwoofer levels.
Adjusting audio equalization settings for different sound categories.
Selecting different audio sources for front and rear cabin zones.
Applying various sound effects like space enhancer and realizer.
Adjusting sound effects according to the listener's position in the vehicle.
Detailed explanation of the remote control's buttons and their operations.
Instructions for installing batteries in the remote control.
A table listing common problems, their causes, and solutions.
Explanations of error messages displayed on the unit and their resolutions.
Procedure to reset the unit to factory default settings.
List of supported disc types, audio, video, and picture file formats.
List of compatible iPod and iPhone models.
Information on using mass-storage-class USB devices with the unit.
Explanations of indicators displayed on the unit's status bar.
Map illustrating DVD region codes by country or area.
Technical specifications for the unit's various sections and components.
Legal terms and conditions for using the embedded software.
Detailed terms and conditions of the license agreement.
Disclaimer of express or implied warranties for the Garmin Products.
Limitation of liability for damages arising from product use or defects.
How to access help and view information about using the device.
Guidance on accessing and using the navigation system features.
Information on acquiring and displaying satellite signal status.
How to create shortcuts to locations or categories in the Where To? menu.
Searching for locations using predefined categories and subcategories.
Locating places by entering category, name, address, or city in the search bar.
Modifying the search area to find locations beyond the current vicinity.
Searching for cities by entering the city name.
Searching for locations based on street intersections.
Setting your most frequently returned-to location as 'Home'.
Step-by-step process to initiate a route to a destination.
Options to view and select from multiple suggested routes.
How the system guides you along the selected route with prompts and map.
Navigating and interacting with the map display for route visualization.
Adding intermediate destinations to an active route.
Creating detours to avoid obstacles like construction zones on the route.
Setting preferences to avoid specific road features or areas.
Personalizing map display by selecting data layers like POIs and road conditions.
Selecting the map view between 2-D (Track Up, North Up) and 3-D.
Displaying all turns and maneuvers for the entire route with distances.
Previewing the upcoming turn, lane change, or maneuver on the map.
Notifying the user of traffic alerts and providing more information.
Displaying current location details for emergency personnel.
Locating nearby services such as hospitals or police stations.
Information on the smartphone application for live data and Garmin Live Services.
Steps required to connect the smartphone to the navigation system.
How to send a location from the smartphone to the navigation system.
How to purchase traffic subscriptions for different regions or countries.
How the navigation system receives and uses traffic information.
Obtaining traffic data through a smartphone link subscription.
How the system optimizes routes based on current traffic conditions.
Displaying color-coded traffic flow and delays on the map.
Purchasing traffic subscriptions and entering the required code.
Adjusting navigation parameters like map layers, view, and route preferences.
Modifying map details, theme, buttons, layers, and dashboards.
Setting route calculation mode, avoidances, and safe driving features.
Configuring display settings such as color mode (Day/Night/Auto).
Restoring system settings to their factory default values.
