Do you have a question about the Kenwood DPF-J3030 and is the answer not in the manual?
frequency response | 4 Hz ~ 20 kHz, ± 0.5 dB |
---|---|
signal to noise ratio | More than 103 dB |
dynamic range | More than 95 dB |
total harmonic distortion + noise | Less than 0.005% (at 1 kHz) |
channel separation | More than 95 dB (at 1 kHz) |
wow & flutter | Unmeasurable Limit |
output level/impedance | 2.0 V/1 kΩ |
digital output | Optical .–15 dBm ~ –21 dBm (Wave length 660 nm) |
laser wavelength | 760 nm - 800 nm |
---|---|
laser power class | Class 1 (IEC) |
power consumption | 10 W |
---|---|
width | 440 mm (17-5/16") |
height | 163 mm (6-7/16") |
depth | 479 mm (18-7/8") |
weight | 7 kg (15.4 lb) |
Important warnings and cautions to prevent fire, electric shock, and ensure safe operation.
Guide on how to enter or change disc names up to 25 characters.
Detailed instructions for naming discs using the remote control unit.
Instructions for connecting audio cords and optical fiber cables.
Guides on connecting to digital amps/MDs and general amplifiers.
Steps to choose discs and tracks to create a custom playback sequence.
How to start the playback of the programmed sequence of tracks.
How to view the list of tracks programmed in the PGM mode.
Procedures for adding new tracks or modifying existing ones in a program.
Methods for removing tracks from the programmed sequence.
How to program and repeat specific tracks from a CD.
Steps to set the unit for continuous playback of one selected disc.
How to turn off the repeat playback mode.
How to enable random playback for tracks on a single selected disc.
How to set the unit for random playback across all loaded discs.
How to turn off the random playback mode.
How to access the mode for assigning titles to non-CD-TEXT discs.
Step-by-step guide to inputting disc titles using the remote control.
How to access the mode for assigning music genres to discs.
How to play and register individual favorite tracks into the best selection file.
How to initiate playback of the registered favorite tracks.
How to connect components and set up for timer-assisted playback.
Steps for choosing the disc, setting volume, and enabling the timer play switch.
How to reset the microcomputer and registered contents for troubleshooting.
Troubleshooting for power, sound, interruption, selection, and auto-start problems.