To Next PageTo Next PageWhy can’t Bluetooth pairing be made on my Kenwood DPX-7000DAB Car Receiver?
If Bluetooth pairing cannot be made on your Kenwood Car Receiver, make sure you have entered the same PIN code to both the unit and the Bluetooth device. Alternatively, delete pairing information from both the unit and the Bluetooth device, then perform pairing again.
What does “NO DEVICE” mean on Kenwood DPX-7000DAB Car Receiver?
If your Kenwood Car Receiver displays “NO DEVICE” when trying to use a USB device, connect a USB device, and change the source to USB again.
What does “PROTECTING SEND SERVICE” mean on Kenwood DPX-7000DAB?
If the Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
What does “NA DEVICE” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “NA DEVICE”, connect a supported USB device and check the connections.
What does “DEVICE FULL” mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “DEVICE FULL”, the number of registered devices has reached its limit. Retry after deleting an unnecessary device.
Why is there no sound coming from my Kenwood DPX-7000DAB?
If you cannot hear any sound from your Kenwood Car Receiver, try these solutions: First, adjust the volume to a level that is audible. Second, check the cords and connections to ensure they are properly connected.
What to do if my Kenwood DPX-7000DAB Car Receiver displays “MISWIRING CHECK WIRING THEN PWR ON”?
If your Kenwood Car Receiver shows the message “MISWIRING CHECK WIRING THEN PWR ON”, turn the power off. Then, check the speaker wires to ensure the terminals are properly insulated. After checking the wires, turn the power back on.
What to do if my Kenwood Car Receiver is not working at all?
If your Kenwood Car Receiver is not working, reset the unit.
Why is playback intermittent or sound skipping on my Kenwood DPX-7000DAB?
If the playback is intermittent or the sound skips on your Kenwood Car Receiver, turn off the power saving mode on your Android device.
Why is DAB reception poor on my Kenwood Car Receiver?
To improve DAB reception on your Kenwood Car Receiver, make sure that [ON] is selected for [DAB ANT POWER].
General| MP3 playback | Yes |
|---|---|
| Audio formats supported | AAC, FLAC, MP3, WAV, WMA |
| Display type | LCD |
| Display digits | 13 digits |
| On Screen Display (OSD) languages | ENG, ESP, RUS |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | AM, DAB, FM, LW, MW |
| Preset stations quantity | 24 |
| USB version | 2.0 |
| Bluetooth version | 2.1+EDR |
| Bluetooth profiles | A2DP, AVRCP, HFP, PBAP, SPP |
| Line outputs (RCA) | 3 |
| USB ports quantity | 1 |
| DIN size | 2 DIN |
| Output power | 200 W |
| RDS features | AF, PTY, TP |
| Product color | Black |
| Frequency range | 20 - 20000 Hz |
| Disc types supported | CD-R, CD-RW |
| Equalizer bands quantity | 13 |
| Signal-to-Noise Ratio (SNR) | 105 dB |
| File format system | FAT 12/16/32 |
| Operating temperature (T-T) | -10 - 60 °C |
Weight and Dimensions| Weight | 1700 g |
|---|---|
| Dimensions (WxDxH) | 182 x 158 x 111 mm |
Details the physical layout and buttons of the unit's front panel.
Initial setup for language selection and disabling the demonstration mode.
Configure the unit's clock and date settings.
Configure the unit's basic operational settings.
Procedure to select the appropriate crossover type for speakers.
Connect the DAB antenna and update the service list.
How to search for DAB ensembles and select services for listening.
Search for and select a specific service by its name.
Adjust settings like AF Set, TI, PTY Search, and Related Services.
Methods for searching and tuning to radio stations.
Adjust tuner settings like Local Seek, Mono Set, AF Set, and PTY Search.
Connect a portable audio player and start playback through the AUX input.
Customize the name displayed for the AUX input source.
How to automatically change sources and start playback from connected media.
Choose how to control iPod or Android devices via the unit or the device itself.
Select storage drive and listen to internet radio services.
Navigate and select audio files from folders or lists.
Adjust USB settings like drive change and skip search ratio.
Connect the external microphone and pair a Bluetooth device for the first time.
Enable automatic Bluetooth pairing when connecting compatible devices.
Pair and connect a remote device using Near Field Communication (NFC).
Handle incoming and ongoing phone calls.
Adjust microphone gain, noise reduction, and echo cancellation.
Set auto answer time and display battery/signal strength.
Make calls using phonebook, call history, or voice recognition.
Initiate calls and control phone functions using voice commands.
Save contacts to memory buttons and make calls from stored numbers.
Configure Bluetooth mode, delete devices, edit PIN, and initialize settings.
Check the connectivity and compatibility of Bluetooth profiles.
Control playback of audio files from a connected Bluetooth device.
Configure fader, balance, and volume offset for audio sources.
Adjust subwoofer, manual EQ, preset EQ, bass boost, and loudness.
Set crossover frequencies and slopes for speaker outputs.
Select speaker sizes and configure detailed crossover parameters.
Adjust display illumination, button brightness, and dimmer time.
Set text scrolling behavior and zone color selection.
Basic steps for resolving general unit malfunctions and connection problems.
Solutions for poor DAB reception, antenna errors, and related service findings.
Diagnose and resolve problems with CD, USB, and iPod playback.
Address issues with Android playback, device support, and connection modes.
Resolve problems with device detection, pairing, and call quality.
Address issues with audio interruptions, player control, and device limitations.
Guidelines for cleaning the unit and handling audio discs properly.
Details on playable audio files, USB, iPod/iPhone, and Android device compatibility.
Technical details for DAB and FM/MW/LW radio reception.
Information on display changes and source-specific display content.
Technical details for CD player and USB device compatibility and performance.
Specifications for Bluetooth version, profiles, output power, and audio settings.
Important safety instructions and cautions before and during installation.
Step-by-step guide for installing the unit in the vehicle.
List of installation parts and guide for in-dash mounting the unit.
Instructions for removing the unit and installing without the mounting sleeve.
Connect the unit's wiring harness to the vehicle's system.
Specific instructions for connecting ISO connectors on VW/Audi/Opel vehicles.
Cautions for film antenna placement and guidelines for determining installation position.
Step-by-step instructions for installing the antenna on either the left or right side.
