Need help?Do you have a question about the Kenwood DPX-MP5100U and is the answer not in the manual?
General| Peak Power Output | 50 watts x 4 channels |
|---|---|
| RMS Power Output | 22 watts x 4 channels |
| Subwoofer Output | Yes |
| Display Type | LCD |
| AUX Input | Yes |
| USB Input | Yes |
| Memory Card Reader | No |
| iPod Compatibility | Yes |
| Bluetooth Compatibility | No |
| HD Radio | No |
| Satellite Radio Ready | No |
| Remote Control | Yes |
| Faceplate | Detachable |
| CEA-2006 Compliant | Yes |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| Tuner Bands | AM/FM |
| Channels | 4 |
| Built-in Display | Yes |
| USB Compatibility | Yes |
| AM/FM Tuner | Yes |
| CD Player | Yes |
| CD-R/RW Playback | Yes |
| AAC Playback | Yes |
| Wireless Remote Control | Yes |
| Preamp Outputs | 3 pairs (front, rear, sub) |
| Preamp Voltage | 2.5V |
| Presets | 18 FM, 6 AM |
| EQ Settings | 3-band parametric EQ |
| Installation Depth | 6.5" |
Precautions to prevent injury or fire, including avoiding short circuits and safe driving practices.
Precautions to prevent damage to the unit, such as proper grounding and fuse replacement.
Warning against loading 8 cm CDs with adapters to avoid unit damage.
Information on connecting Kenwood disc changers/CD players released from 1998 onwards.
Explanation of lens fogging due to condensation and how to resolve it.
Explanation of Class 1 Laser Product marking and safety.
Instructions on how to reset the unit to factory settings using the Reset button.
Instructions on how to clean the unit's faceplate.
Instruction to cancel Demonstration mode before first use.
Information about the "Music Editor" PC application included on CD-ROM.
Details on playable audio files, disc media, file formats, and USB devices.
Explanation of audio file playback order based on folder/file tree.
Advice on installing USB devices to ensure safe driving.
Warning against connecting USB devices through a USB hub.
Recommendation to back up audio files due to potential erasure.
Instruction to use a cable for connecting USB devices.
Recommendation to use the optional CA-U1EX for USB device connection.
Warning not to touch the recording surface of CDs.
Instructions for cleaning CDs from the center outwards.
Lists types of CDs that cannot be used, such as colored or dirty discs.
Information that unfinalized CD-Rs/CD-RWs cannot be played.
Instructions for turning the power ON and OFF.
How to select the audio source (Tuner, USB, CD, etc.).
Instructions for increasing and decreasing the volume.
Quickly turns down the volume.
Selects the best sound setting preset for different types of music.
Adjusts audio items like Bass, Middle, and Treble levels.
Detailed adjustment of Bass, Middle, and Treble levels.
Sets the Sound system, such as Cross over Network.
Sets front and rear channel sound in the Dual Zone System.
Fine-tuning System Q value based on speaker type.
Automatically mutes audio system during a phone call.
Turns the Subwoofer output ON or OFF.
Changes the information displayed on the unit.
Selects the radio station by tuning or preset.
Chooses the tuning mode (Auto seek, Preset seek, Manual).
Enters frequency and tunes directly using remote control.
Stores stations in the memory for quick recall.
Automatically stores stations with good reception into memory.
Recalls stations stored in the memory.
Changes the tuning frequency step for FM and AM bands.
Selects TV channels for connected LX BUS Television.
Stores TV channels in memory for quick recall.
Recalls TV channels stored in memory.
Enters TV channel and tunes directly using remote control.
Instructions for playing CDs and audio files.
Steps for connecting a USB device.
Instructions for playing music from a USB device or iPod.
Steps for safely removing a USB device.
Selects the device inserted in the Multi Card Reader.
Plays discs set in an optional accessory disc player.
How to fast forward or reverse music playback.
Switches between music contained in the disc or folder.
Switches between folders/albums on the disc changer or media.
Searches for music by entering its number.
Searches for discs by entering their number.
Replays music, discs, or audio file folders.
Plays the beginning of each music track for searching.
Plays music from a disc or folder in random order.
Plays all discs in a disc changer in random order.
Plays randomly from all audio files recorded in the media.
Selects music from the device or media being played.
Selects folders by tracing hierarchical levels.
Selects target folders containing playable audio files.
Scrolls displayed CD text, Audio file text, or MD title.
Explains basic operation for setting beep sound and other functions.
Activates the Security Code to prevent unauthorized usage.
Deactivates the Security Code function.
Sets the operation check sound (beep sound) ON/OFF.
Adjusts the hours and minutes of the clock.
Turns off the display when no operation is performed for 5 seconds.
Dims the display automatically when the vehicle light switch is turned ON.
Alternates preout between rear and subwoofer.
Controls the built-in amplifier, enhancing preout quality when OFF.
Sets front and rear channel sound for the Dual Zone System.
Controls the LX AMP connected to the unit.
Restores high frequency region for low bit-rate audio files.
Alternates reception between stereo and mono to reduce noise.
Selects the display when changing to Auxiliary input source.
Sets the displayed text scroll behavior.
Sets the Built-in Auxiliary Input function.
Forces CD playback with special formats.
Registers sound setup values that cannot be erased by Reset button.
Recalls sound setup registered by Audio Preset Memory.
Displays the firmware version of the unit.
Sets the demonstration mode ON or OFF.
Instructions for loading and replacing the remote control batteries.
Overview of basic remote control operations like VOL, SRC, ATT.
Selects and adjusts audio items using the remote.
Turns Dual Zone System ON or OFF and adjusts rear channel volume.
Buttons for FM/AM band selection, tuning, and preset recall.
Buttons for navigating tracks, discs, and folders.
Buttons for TV band selection, channel tuning, and preset recall.
Lists the included accessories.
Step-by-step guide for installing the unit in the car.
Information on connecting an iPod and related system limitations.
How to use the steering wheel remote control feature.
Connection instructions for external accessories.
Connection point for the FM/AM antenna.
Connection of the main wiring harness for power and speakers.
Connection for power control, e.g., for optional power amplifier.
Connection for motor antenna or film-type antenna booster.
Connection for telephone ring or conversation mute.
Connection to the car light control switch for dimming.
Steps for installing the unit onto the car bracket using screws.
Basic issues like Touch Sensor Tone not working.
Problems related to radio reception.
Issues with specified discs not playing.
Problems with sound skipping during audio file playback.
Issues with USB device detection or playback.
Explains various error messages like EJECT, NO DISC, TOC ERR, READ ERR.
Indicates CD player operation issues.
Indicates speaker wire short-circuit or protection function activation.
Indicates an unsupported audio file format is being played.
Indicates a copy-protected file is played.
Indicates Demonstration mode has been selected.
Indicates a source is selected without a connected USB device.
Indicates an unsupported USB device is connected.
Indicates the connected USB device contains no playable audio files.
Indicates a USB device with a higher current capacity is connected.
Indicates a connection failure with the iPod.
Indicates the USB device is in remove mode.
Technical specifications for the FM tuner.
Technical specifications for the AM tuner.
Technical specifications for the CD player.
Technical specifications for the audio output.
Technical specifications for the USB interface.
Technical specifications for the auxiliary input.
General specifications like operating voltage and dimensions.
To Next Page
