E
Emily LongSep 3, 2025
What does 'NO STATIONS' mean on Kenwood DPX301U?
- HHannah ReynoldsSep 3, 2025
If your Kenwood Car Receiver displays 'NO STATIONS', no stations are found.
To Next PageTo Next PageWhat does 'NO STATIONS' mean on Kenwood DPX301U?
If your Kenwood Car Receiver displays 'NO STATIONS', no stations are found.
What does 'NO SKIPS' mean on Kenwood DPX301U?
If your Kenwood Car Receiver displays 'NO SKIPS', the skip limit has been reached.
What to do if Kenwood DPX301U Car Receiver displays 'NO DEVICE or READING'?
If you are getting a 'NO DEVICE or READING' error that keeps flashing on your Kenwood Car Receiver, try switching off the developer options on your Android device. If that doesn't work, try reconnecting the Android device. If the issue persists, the connected Android device may not support [BROWSE MODE].
What does 'CHECK DEVICE' mean on Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'CHECK DEVICE', check the Pandora application on your device.
How to resolve 'NA DEVICE' error on Kenwood DPX301U?
If you see a 'NA DEVICE' error on your Kenwood Car Receiver, connect a supported USB device and check the connections.
What to do if Kenwood DPX301U shows 'iPod ERROR'?
If your Kenwood Car Receiver displays 'iPod ERROR', try reconnecting the iPod, or reset the iPod.
What to do if Kenwood DPX301U Car Receiver says 'NO MUSIC'?
If the Kenwood Car Receiver displays 'NO MUSIC', connect a USB device that contains playable audio files.
Why I cannot playback at [BROWSE MODE] on Kenwood Car Receiver?
If you cannot playback at [BROWSE MODE] on your Kenwood Car Receiver, make sure KENWOOD MUSIC PLAY APP is installed on the Android device. Reconnect the Android device and make the appropriate setting in [ANDROID SETUP]. If this does not solve the problem, the connected Android device does not support [BROWSE MODE].
How to fix 'READ ERROR' on Kenwood Car Receiver?
If you see a 'READ ERROR' on your Kenwood Car Receiver, copy the files and folders onto the USB device again. If this does not solve the problem, reset the USB device or use another USB device.
How to fix 'NO DEVICE' error on Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'NO DEVICE', connect a USB device and change the source to USB again.
General| Channels | 4 |
|---|---|
| Tuner | AM/FM |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| Display Type | LCD |
| iPod Compatibility | Yes |
| Android Compatibility | Yes |
| HD Radio | No |
| RMS Power Output | 22W |
| Peak Power Output | 50W |
| Preamp Outputs | 2-channel |
| Compatible Formats | MP3, WMA |
| Satellite Radio | Ready |
