To Next PageTo Next PageWhy can't I control my Bluetooth audio player with my Kenwood Car Receiver?
If the connected Bluetooth audio player cannot be controlled by your Kenwood Car Receiver: * Check whether the connected Bluetooth audio player supports Audio/Video Remote Control Profile (AVRCP). * Disconnect and connect the Bluetooth player again.
What does 'READ ERROR' mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “READ ERROR”: * Copy the files and folders onto the USB device again. * If this does not solve the problem, reset the USB device or use another USB device.
Why is voice calling not working on my Kenwood Car Receiver?
If voice calling is not successful on your Kenwood Car Receiver: * Use voice calling in a quieter environment. * Reduce the distance from the microphone when you speak the name. * Make sure the same voice as the registered voice tag is used.
What does 'NA DEVICE' mean on my Kenwood DPX592BT?
If your Kenwood Car Receiver displays “NA DEVICE”, connect a supported USB device, and check the connections.
What does 'COPY PRO' mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays “COPY PRO”, a copy-protected file is being played.
Why is playback intermittent on my Kenwood DPX592BT Car Receiver?
If playback is intermittent or sound skips on your Kenwood Car Receiver, turn off the power saving mode on the Android device.
Why is my Kenwood DPX592BT Car Receiver showing “MISWIRING CHECK WIRING THEN PWR ON”?
This message indicates a wiring issue. Turn off the power, ensure the speaker wire terminals are properly insulated, and then turn the power back on.
Why is my Kenwood DPX592BT showing “DEVICE FULL”?
If your Kenwood Car Receiver displays “DEVICE FULL”, the number of registered devices has reached its limit. Delete an unnecessary device and try again.
What does “PROTECTING SEND SERVICE” mean on my Kenwood DPX592BT Car Receiver?
The message “PROTECTING SEND SERVICE” indicates that the unit requires servicing. Send the unit to the nearest service center.
What does 'DEVICE FULL' mean on my Kenwood DPX592BT?
If your Kenwood Car Receiver displays “DEVICE FULL”, the number of registered devices has reached its limit. Retry after deleting an unnecessary device.
General| Channels | 4 |
|---|---|
| Max Power Output | 50W x 4 |
| RMS Power Output | 22W x 4 |
| Bluetooth | Yes |
| USB Port | Yes |
| AUX Input | Yes |
| CD Player | Yes |
| Display Type | LCD |
| Remote Control | Yes |
| Subwoofer Output | Yes |
| Tuner | AM/FM |
| Built-in Microphone | Yes |
| Steering Wheel Control | Yes |
| Equalizer | 13-band |
| Preamp RCA Outputs | 3 pairs |
| Compatible Formats | MP3, WMA, AAC, WAV |
