M
michele27Sep 4, 2025
What does 'NO MUSIC' mean on my Kenwood DPX791BH?
- WwilsonbrandonSep 4, 2025
If your Kenwood Car Receiver displays 'NO MUSIC', connect a USB device that contains playable audio files.
To Next PageTo Next PageWhat does 'NO MUSIC' mean on my Kenwood DPX791BH?
If your Kenwood Car Receiver displays 'NO MUSIC', connect a USB device that contains playable audio files.
What does 'DEVICE FULL' mean on my Kenwood DPX791BH Car Receiver?
If your Kenwood Car Receiver displays 'DEVICE FULL', retry after deleting an unnecessary device.
What to do if my Kenwood Car Receiver displays “PROTECTING SEND SERVICE”?
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
Why is there no sound from my Kenwood DPX791BH?
If you cannot hear any sound from your Kenwood Car Receiver, try these solutions: First, adjust the volume to ensure it is at an audible level. If the sound is still absent, check all cords and connections to make sure they are properly connected.
What to do if my Kenwood DPX791BH says 'MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON'?
If your Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals THEN PWR ON”, turn the power off, check the wiring, and then turn the power on again.
What to do if my Kenwood DPX791BH displays 'NO DEVICE'?
If your Kenwood Car Receiver displays 'NO DEVICE', connect a USB device and change the source to USB again.
What does 'CHECK DEVICE' mean on my Kenwood DPX791BH Car Receiver?
If your Kenwood Car Receiver displays 'CHECK DEVICE', check the Pandora application on your device.
What does 'NOT SUPPORT' mean on my Kenwood DPX791BH Car Receiver?
If your Kenwood Car Receiver displays 'NOT SUPPORT', the connected phone does not support the Voice Recognition feature.
What does 'NA DEVICE' mean on my Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'NA DEVICE', connect a supported USB device, and check the connections.
What does 'READ ERROR' mean on my Kenwood DPX791BH Car Receiver?
If your Kenwood Car Receiver displays 'READ ERROR', try copying the files and folders onto the USB device again. If the problem persists, reset the USB device or use another USB device.
General| Brand | Kenwood |
|---|---|
| Model | DPX791BH |
| Category | Car Receiver |
| Language | English |
General safety precautions and warnings related to product usage and potential hazards.
Notes and warnings regarding FCC and Industry Canada regulations for radio frequency devices.
Important guidelines and warnings for safe operation before initial use.
Overview of Bluetooth profiles and the process for pairing devices.
Handling incoming calls and adjusting microphone gain and echo cancellation.
Configuring equalizer settings and adjusting bass, mid, and treble levels.
Solutions for common issues with sound, radio reception, and media playback.
Resolving problems specific to Android devices and streaming services.
Essential steps for connecting wires and physically mounting the unit.
Methods for in-dash mounting, Toyota-specific installation, and unit removal.
Visual guide to wiring connections and identification of included installation parts.
