Kenwood ES460 series - User Manual

Questions and Answers

W
weissjasmineAug 14, 2025
Why is espresso coffee not coming out of my Kenwood ES460?
- J
  Jaime RodriguezAug 14, 2025
  If espresso coffee isn't coming out of your Kenwood Coffee Maker, several factors could be at play. First, the coffee might be too damp or pressed too firmly into the filter; ensure you're using ground coffee suitable for espresso makers and press it more lightly. If necessary, adjust the grind. Also, check if the holes in the filter holder spouts are blocked and clean them. The liquid coffee/boiler outlet could also be blocked, so clean it according to the cleaning section. Make sure the tank is correctly fitted to open the valve at the bottom. Finally, if the crema device holes are blocked, dismantle it and clean the parts thoroughly, referring to the cleaning section.
T
turnerrickyAug 17, 2025
Why is my Kenwood ES460 Coffee Maker dispensing cold espresso?
- K
  Kenneth HughesAug 17, 2025
  If the espresso coffee from your Kenwood Coffee Maker is cold, it could be due to a few reasons. Ensure you preheat the machine following the instructions. Also, preheat your cups by rinsing them with hot water or placing them on the cup warming tray. Finally, make sure the OK light is glowing before you turn the selector knob to the coffee position.
S
shari72Aug 21, 2025
What to do if espresso drips from the filter holder edges on Kenwood Coffee Maker?
- B
  Brandon ElliottAug 21, 2025
  If espresso coffee drips from the edges of the filter holder instead of the holes in your Kenwood Coffee Maker, first, refit the filter holder, ensuring it's correctly located and turned to the right. If the issue persists, the gasket of the espresso boiler might have lost its elasticity, in which case you should get the gasket replaced.
B
brian12Aug 25, 2025
Why is the pump on my Kenwood Coffee Maker so noisy?
- S
  Sheila TaylorAug 26, 2025
  If the pump of your Kenwood Coffee Maker is too noisy, the water tank might be empty; fill it with water. Alternatively, the tank might be incorrectly fitted, preventing the valve at the bottom from opening; press the tank lightly to open the valve.
H
Holly WadeAug 28, 2025
Why is the coffee cream light and dispensed too quickly from my Kenwood Coffee Maker?
- P
  peggy45Aug 28, 2025
  If the coffee cream from your Kenwood Coffee Maker is light in color and dispensed too quickly, it could be because the ground coffee hasn't been pressed enough, so press the coffee more firmly. You might also be using insufficient ground coffee, so increase the quantity in the filter. Additionally, too much coffee may have been dispensed, so decrease the quantity dispensed. Finally, the coffee itself might be unsuitable, so change the type of coffee you're using.
A
Ashley FernandezSep 1, 2025
Why is the coffee cream dark and dispensed too slowly from my Kenwood ES460 Coffee Maker?
- E
  Eric AndersonSep 1, 2025
  If the coffee cream from your Kenwood Coffee Maker is dark in color and dispensed too slowly, it could be due to several reasons. The ground coffee may have been pressed too firmly, so press it less. The liquid coffee/boiler outlet might be blocked, requiring cleaning. You might be using too much coffee, so decrease the quantity. The coffee could also be too finely ground or unsuitable for espresso machines, so change the coffee to one suitable for espresso machines.
T
Tina JoyceSep 5, 2025
Why does my Kenwood Coffee Maker make coffee with an acidic taste?
- C
  Carrie StephensonSep 5, 2025
  If your Kenwood Coffee Maker produces coffee with an acidic taste, the machine might not have been rinsed thoroughly after descaling. Flush the machine with several changes of clean water and rinse all components, referring to the cleaning instructions.
A
andrewmontesSep 9, 2025
Why is the milk not frothing in my Kenwood ES460 when making a cappuccino?
- T
  Tony LeeSep 9, 2025
  If the milk does not froth when making a cappuccino with your Kenwood Coffee Maker, ensure the milk is cold enough by using milk directly from the refrigerator. Also, the cappuccino maker might be dirty, so clean the steam/hot water delivery tube as well as the nozzle.