How to fix Kenwood Coffee Maker when espresso doesn't come out?
If espresso coffee isn't dispensing from your Kenwood Coffee Maker, ensure you're using ground coffee suitable for espresso machines. Lightly press the coffee in the filter, adjusting the grind if needed. Additionally, clear any blockages in the spouts and ensure the tank is correctly seated to open the valve at the bottom. Clean the crema device thoroughly.
Why is the coffee cream light and dispensed too quickly from my Kenwood kMix ES020?
If the coffee cream from your Kenwood Coffee Maker is light and dispenses too quickly, try pressing the coffee more firmly in the filter and increasing the quantity of coffee used. You may also want to decrease the amount of coffee dispensed into the cup or consider changing the type of coffee you are using.
What to do if espresso coffee drips from the edges of the filter holder of my Kenwood kMix ES020?
If espresso coffee is dripping from the edges of the filter holder instead of the holes in your Kenwood Coffee Maker, refit the filter holder, ensuring it is correctly located and turned to the right. Also, clean the holes in the spouts and decrease the quantity of coffee.
Why is the coffee cream dark and dispensed too slowly from my Kenwood kMix ES020 Coffee Maker?
If the coffee cream from your Kenwood Coffee Maker is dark and dispenses too slowly, press the coffee less firmly. You may also need to decrease the quantity of coffee used, ensure the machine is cleaned, and consider changing the type of coffee to one suitable for espresso machines.
Why is the espresso coffee cold from my Kenwood Coffee Maker?
If your espresso coffee is cold when using the Kenwood Coffee Maker, preheat the coffee machine following the instructions. Also, wait until the green coffee indicator light stops flashing before pressing the coffee button.
Why is the pump of my Kenwood kMix ES020 so noisy?
If the pump of your Kenwood Coffee Maker is too noisy, fill the tank with water. Also, press the tank lightly to open the valve at the bottom.
What to do if my Kenwood Coffee Maker produces coffee with an acidic taste?
If the coffee from your Kenwood Coffee Maker has an acidic taste, flush the machine with several changes of clean water and rinse all components.
Why doesn't espresso coffee come out of my Kenwood kMix ES020?
If espresso coffee doesn't come out of your Kenwood Coffee Maker, it might be due to several reasons. First, the coffee might be too damp or pressed too firmly into the filter; ensure you're using coffee suitable for espresso makers and press it lightly. If necessary, change the grind. Second, the holes in the filter holder spouts could be blocked; clean them thoroughly. Third, the coffee outlet might be blocked; clean it as instructed in the cleaning section. Fourth, the tank might be incorrectly fitted, preventing the valve at the bottom from opening; press the tank lightly to open the valve. Lastly, the holes in the crema device might be blocked; dismantle it and clean the parts thoroughly, referring to the Cleaning (filter) section.
What to do if espresso coffee drips from the edges of the filter holder on my Kenwood Coffee Maker?
If the espresso coffee from your Kenwood Coffee Maker is dripping from the edges of the filter holder instead of the holes, several factors could be at play. Ensure the filter holder is correctly attached by refitting it, making sure it is located correctly and turned to the right. The gasket of the espresso boiler might have lost its elasticity, requiring a replacement (refer to Service and Customer Care). Also, check if the holes in the filter holder spouts are blocked and clean them if necessary. Finally, ensure you haven't placed too much coffee in the filter; decrease the quantity if needed.
Why is the coffee cream light in colour and dispensed too quickly from my Kenwood kMix ES020 Coffee Maker?
If the coffee cream from your Kenwood Coffee Maker is light in color and dispensed too quickly, it could be due to a few reasons. You might not have pressed the ground coffee firmly enough; try pressing it more firmly. Another reason may be that you haven't used enough ground coffee; increase the quantity in the filter. You might be dispensing too much coffee; decrease the amount dispensed into the cup(s). Finally, the coffee you're using might be unsuitable; consider changing the type of coffee.
General| Brand | Kenwood |
|---|---|
| Model | kMix ES020 series |
| Category | Coffee Maker |
| Language | English |
Identifies major parts like water tank, steam nozzle, coffee outlet, and filter holder.
Details the buttons, knobs, and indicator lights for machine operation.
Includes items like filters, measuring spoon, and tamper.
Important warnings regarding safe operation, handling, and child supervision.
Essential conditions for operating the machine correctly and preventing damage.
Specific electrical safety requirements for UK users regarding the power cord and fuse.
Procedure to clean the steam nozzle and tube after use.
Instructions for cleaning the water tank, lid, and filter holder.
Detailed steps for cleaning the coffee filter and its components.
Guidance on emptying and cleaning the drip tray and cup stand.
Procedure for cleaning the coffee outlet to maintain coffee quality.
Information on replacing a damaged power cord for safety.
Details for obtaining assistance, repairs, and spares.
Diagnosing and fixing issues where coffee does not come out of the machine.
Resolving leaks from the edges of the filter holder.
Troubleshooting cold espresso or slow dispensing.
Addressing issues when milk does not froth correctly.
To Next Page
