Need help?Do you have a question about the Kenwood GE-930 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Frequency Bands | 10 |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | 0.01% |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Gain | ±12 dB |
| Input Sensitivity | 150 mV |
| Band Range | ±12 dB |
| Weight | 5.5 kg |
| Type | Stereo Graphic Equalizer |
| Output Level | 1V |
| Frequency Bands (Hz) | 1k, 2k, 4k, 8k, 16k |
Section to record serial number for service and warranty purposes.
Instructions for safely unpacking the unit and checking for shipping damage.
Details on selecting AC voltage for different regions and proper switch setting.
Covers power sources, cord protection, electric shock, enclosure, and AC outlets.
Guidelines for ventilation, moisture, temperature, and heat exposure.
Instructions for cleaning and responding to abnormal smells or smoke.
How the equalizer adjusts frequency response to counter room acoustics.
Using the equalizer to enhance or attenuate specific instruments or voices.
Detailed explanation of equalizer controls for various frequency ranges.
Details on connecting for system operation and remote control via specific terminals.
Steps to set up and play audio with equalizer effects applied.
Functionality of the REVERSE key for encoding/decoding equalization patterns.
Guide to recording audio with applied equalizer patterns onto tape.
Instructions for connecting and using microphones with the unit.
Understanding the spectrum analyzer display for input signal frequency analysis.
Using the graphic equalizer display to set frequency characteristics.
To Next Page
