Do you have a question about the Kenwood HCG600 and is the answer not in the manual?
Procedure for igniting the gas burners using the electric ignition system or alternative methods.
Key requirements regarding installation by qualified technicians, compliance with regulations, and safety for units.
Technical details and measurements required for the proper installation of the cooking hob into kitchen fixtures.
Specific dimensions and clearances needed for installing the hob into cabinets and near other appliances.
Step-by-step guide for attaching installation brackets and securing the cooker top into the fixture.
Requirements for room ventilation and air flow necessary for safe gas combustion.
Guidance on installing extractor hoods or fans for the safe evacuation of combustion gases.
Steps for connecting the appliance to the gas mains, specifying components and qualified technician requirement.
Instructions for adapting the appliance for different gas types and performing injector substitution.
Crucial warnings regarding electrical installation, emphasizing qualified technicians and earth wiring.