What to do if Kenwood Hob doesn't start when plugged in?
If no indicators light up after plugging in the appliance and pressing the power button, check that the plug is correctly inserted and the power is switched on. Also, if your appliance has one, check the plug fuse.
What to do if Kenwood IH100 timer is set but heating doesn't begin?
If the timer is set and the on/off button is flashing, but heating doesn't begin, increase the power using the power control.
What to do if Kenwood IH100 heating stops suddenly during operation?
If the heating stops suddenly during operation, check the power supply to the appliance. Also, ensure that the air entry or vent is not blocked. Verify that the timing period hasn't ended, or that the appliance hasn't overheated or entered error mode. If overheating or error mode is suspected, unplug the hob, allow it to cool, and try again later.
What to do if failure codes E:03 or E:06 occur on my Kenwood IH100 Hob?
If failure codes E:03 or E:06 appear, it is possible that the appliance may have overheated or boiled dry. Unplug the Kenwood hob, allow it to cool completely, and then try using it again.
What to do if E:07 E:08 error occurs on Kenwood IH100 Hob?
If error codes E:07 or E:08 are displayed, it indicates a fluctuation in the mains supply. Unplug the Kenwood hob, allow it to cool down, and then try again later.
Why Kenwood IH100 Hob power button indicator lights up, but heating doesn't start?
If the power button indicator lights up but the heating does not start when you adjust the power control, make sure that a suitable pan is present and centrally located on the hob.
What to do if Kenwood IH100 Hob shows failure codes E:03 E:06?
If the Kenwood Hob displays error codes E:03 or E:06, it might have overheated or boiled dry. To resolve this, unplug the appliance, let it cool down completely, and then try using it again.
Why does my Kenwood IH100 stop heating suddenly?
If the Kenwood Hob suddenly stops heating during operation, there are several things you can check: * Ensure the appliance is properly connected to the power supply. * Make sure that the air entry or vent is not blocked. * Verify that the timer period hasn't ended. * Check if the hob has overheated or entered an error mode. If so, unplug it, allow it to cool, and then try again.
What does E:07 E:08 mean on Kenwood IH100?
If the Kenwood Hob displays error codes E:07 or E:08, it indicates a fluctuation in the mains supply. Unplug the appliance, allow it to cool down, and then try using it again later.
Why is my Kenwood IH100 Hob power on but not heating?
If the power button indicator lights up on your Kenwood Hob, but heating doesn't start when you adjust the power control, ensure that a suitable pan is present, centrally located on the hob.
Important note regarding medical implants and magnetic fields.
Precautions for appliance use, cord handling, and unplugging.
Instructions for setting and using the timer function.
Describes automatic turn-off mechanisms for inactivity and overheating.
Steps to resolve issues where no indicators are active.
Troubleshooting for when the power button is on but heating fails.
Guidance for specific error codes related to overheating or supply fluctuations.
General| Hob type | Zone induction hob |
|---|---|
| Product color | Silver |
| Appliance placement | Countertop |
| Number of cooking zones | 1 zone(s) |
To Next Page
