Need help?Do you have a question about the Kenwood HM-337-SG and is the answer not in the manual?
General| CD Player | Yes |
|---|---|
| USB Playback/Port | Yes |
| Type | Micro System |
| Power Output | 20W |
| Speaker Type | 2-way speakers |
| Tuner | FM |
| Output | Headphone output |
| Speaker load impedance | 4 ohms |
Unpack the unit carefully and make sure that all accessories are present.
Important warnings to prevent fire or electric shock and to ensure safe operation.
Setup instructions for the AM loop antenna.
Guidance on connecting the left and right speakers to the terminals.
Detailed description of each button on the remote control unit.
Description of the main unit's controls, indicators, and display elements.
Explanation of the system's demonstration mode and how to activate/deactivate it.
Instructions on how to turn the system on from standby mode.
Instructions on how to put the system into standby mode.
How to adjust the volume level and use the mute function.
Explanation of EQ and X-BASS features for sound enhancement.
Information on connecting headphones to the unit.
Step-by-step guide to loading a CD into the player.
How to start, interrupt, resume, and stop CD playback.
Methods to select specific tracks or passages on a CD.
Instructions on how to program and store up to 60 tracks for playback.
How to enable and disable random playback mode for CDs.
How to repeat a single track or all tracks of a CD.
How to listen to the first 10 seconds of each track on a CD.
How to use the RDS/display/demo button to view information and cycle through displays.
Methods for tuning to FM/AM radio stations, including auto-seek.
How to store up to 20 FM and 20 AM radio stations in memory.
How to select and tune to a stored preset radio station.
How to switch between stereo and mono reception modes for FM.
Explanation of RDS features like PTY, PS display, and Radio Text.
How to automatically tune to stations broadcasting a specific program type (genre).
Instructions for inserting and playing a cassette tape.
Guide to recording from radio or CD onto a cassette tape.
Steps to record a radio program onto a cassette tape.
Steps to record tracks from a CD onto a cassette tape.
How to program CD tracks and record them onto a cassette tape.
How to display the current time in standby or any source mode.
Step-by-step guide to setting the system's clock.
How to set the timer for automatic playback or recording at a specific time.
How to turn the timer function on or off.
How to set the sleep timer to automatically turn off the system.
Guidelines for cleaning the unit, discs, heads, and tape path.
Precautions regarding condensation inside the unit due to temperature changes.
Notice regarding copyright infringement when copying tapes or discs.
Procedure to reset the microcomputer to restore normal operation.
Troubleshooting common issues like no sound, reversed outputs, and demo operation.
Troubleshooting 'NO DISC' error and other CD playback issues.
Troubleshooting radio reception issues like noise and antenna adjustment.
Troubleshooting recording issues and tape compatibility.
Troubleshooting timer and clock not working or being erased.
Troubleshooting steps for a malfunctioning remote control.
Specifications for the amplifier, tuner, CD player, and cassette deck sections.
Specifications for the speaker enclosure, configuration, impedance, and dimensions.
General specifications including power consumption, dimensions, and weight.
To Next Page
