Kenwood K-CD01 User Manual

English
|
23
M
Installation
• When you install or remove the unit, hold the chassis (Metal part) to conduct the operation.
If you hold the control panel, it may cause damage.
non-Japanese cars
Firewall or metal support
Screw (M4X8)
(commercially available)
Self-tapping screw
(commercially available)
Metal mounting strap
(commercially available)
Bend the tabs of the
mounting sleeve with a
screwdriver or similar utensil
and attach it in place.
Accessory5
Japanese cars
Align the holes in the unit (two locations on each
side) with the vehicle mounting bracket and
secure the unit with the accessory screws.
• During installation, do not use any screws except for
those provided. The use of different screws might result
in damage to the main unit.
• Damage may occur if a screwdriver or similar tool is used
with excessive force during the installations.
8mm
MAX.
M5mm
M5mm
8mm
MAX.
T
N
T
N
T/N
T: Toyota cars
N: Nissan cars
Accessory3...for Nissan car
Accessory4 ...for Toyota car
3
4
B64-2923-00U.S.Indd23 04.9.3,4:23:51PM

Kenwood K-CD01 Specifications

General

Category	Car Receiver
Brand	Kenwood
Model	K-CD01
Type	CD Receiver
Detachable Face	Yes
CD-R/RW Playback	Yes
CD Player	Yes
Preamp Outputs	Yes
Display	LCD
DIN Size	1 DIN
Preamp Outputs Channel	2 Channels