Kenwood K23CSS12 - Clock Setting

13
t
i
m
e
r
•
w
e
i
g
h
t
•
a
u
t
o
m
e
n
u
convection
weight/time
defrost
start/
+30sec/confirm
clock/
kitchen timer
stop/clear
microwave
grill/
combination
2, 4
1, 3, 5
clock setting
When the microwave is connected to the mains power, the LED display will show ”0:00” and the
microwave will sound once. Please ensure that you have set the clock prior to use.
Please follow the steps below to set the clock.
1. Press the clock/kitchen timer button and
the hour digits will flash.
2. Turn the timer/weight/auto menu dial to
adjust the hour digits. The input time has to
be within 0-23.
3. Press the clock/kitchen timer button and
the minute digits will flash.
4. Turn the timer/weight/auto menu dial to
adjust the minute digits, the input time has
to be within 0-59.
5. Press the clock/kitchen timer button
again to complete the clock setting. “:” will
start flashing and the time will illuminate to
confirm that the clock setting is complete.
• This is a 24-hour clock. When the
microwave is connected to the
mains power for the first time or
when the power is resumed after a
power interruption, the LED display
will show “0:00”. To re-set the clock,
simply follow the above 5 steps.
• In the process of clock setting, if
the stop/clear button is pressed
or if there is no operation within 5
minutes, the microwave will go back
to the previous status automatically.
• If the clock needs to be re-set,
please repeat steps 1 to 5.
• To find out the current time while
the microwave is operating, press
the clock/kitchen timer button. It
will last for 2-3 seconds and then
return to its original display.
K23CSS12_IB_ final_RC120531.indd 13 31/05/2012 10:42 AM