11
1. Pull the handle to open the door.
2. Place a cup of water on the glass turntable
plate. Make sure the cup is microwave safe
(it should not have any decorative metal
trim).
3. Close the door.
4. Press the stop/clear button to clear any
settings that have already been made
5. Press the start/+30sec/confirm button
once to start a simple 30-second
microwave cooking cycle and that
allows you to check the operation of the
microwave.
6. When the cooking cycle has finished, the
water should be hot (be careful when you
take the cup out of the microwave). Press
the stop/clear button to clear any settings.
checking your microwave
Check your microwave after unpacking.
For your safety, the microwave
stops if the door is opened during
cooking. Close the door and press
the start/+30sec/confirm button to
continue the cooking cycle.
5
4, 6
K31GSS10_IB_final110211.indd 11 11/02/2011 12:07 PM
To Next Page
Loading...
Need help?
General
