Need help?Do you have a question about the Kenwood KA-80 and is the answer not in the manual?
Guide to setting the AC voltage selector switch for correct operation based on local voltage.
Precautions for handling the power cord to prevent fire and shock hazards.
Details on using switched and unswitched AC outlets for powering other components.
Instructions for connecting speakers, including polarity and impedance requirements.
Pre-power setup, and operating the Tuner, Turntable, and Auxiliary inputs.
Guide to adjusting volume, tone, balance, and loudness for optimal listening.
Guide to setting the AC voltage selector switch for correct operation based on local voltage.
Precautions for handling the power cord to prevent fire and shock hazards.
Details on using switched and unswitched AC outlets for powering other components.
Instructions for connecting speakers, including polarity and impedance requirements.
Pre-power setup, and operating the Tuner, Turntable, and Auxiliary inputs.
Guide to adjusting volume, tone, balance, and loudness for optimal listening.
General| Power Output | 80 watts per channel into 8Ω (stereo) |
|---|---|
| Frequency Response | 5Hz to 100kHz |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
| Total Harmonic Distortion (THD) | 0.03% |
| Damping factor | 50 |
| Channel Separation | 55dB |
To Next Page
