Need help?Do you have a question about the Kenwood KA-801 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Total Harmonic Distortion (THD) | 0.03% |
| Input Sensitivity | 2.5 mV (MM), 150 mV (line) |
| Dimensions | 430 x 150 x 360 mm |
| Speaker load impedance | 4Ω to 16Ω |
| Channel Separation | 60dB (1kHz) |
| Power Output | 80 watts per channel into 8Ω (20Hz-20kHz, THD 0.07%) |
Visual representation of signal flow and component interaction.
Explanation of the protection circuit using IC HA12002.
Procedure for adjusting preamp offset voltage.
Steps to adjust the power meter level.
Procedure for adjusting power amp offset voltage.
Steps for adjusting bias current.
Adjustment of offset voltage in the preamplifier section.
Adjustment of offset voltage for the output stage.
Adjustment of bias current.
Adjustment of offset voltage for the preamplifier.
Adjustment of offset voltage for the power amplifier.
Technical specifications for the amplifier's power output.
To Next Page
