Need help?Do you have a question about the Kenwood KAC-525 and is the answer not in the manual?
Important safety advice to prevent fire, injury, and damage during operation.
Proper methods for cleaning the amplifier to avoid damage.
Information regarding FCC regulations and potential interference.
How to physically mount the amplifier unit securely.
Guidance on selecting an appropriate place for the amplifier installation.
Connecting the RCA cable's ground cord to the designated terminal.
Explanation of the operation switch for selecting amplification modes.
How to adjust the input sensitivity control based on pre-out level.
Configuring for high-power monaural output with one unit.
Configuring for high-power stereo output with two units.
Warning about maintaining minimum speaker impedance for safe operation.
How coils and capacitors are used for frequency band division.
Formulas to calculate and select appropriate coils and capacitors.
Illustrative setup for the Tri-mode configuration.
Caution regarding speaker impedance to prevent amplifier damage.
Steps before final installation, including battery disconnection.
Connecting input, output, speaker, ground, and power cables.
Mounting the unit and performing post-installation checks.
Details of the accessory provided with the unit.
To Next Page
General
