To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KAC-X401M and is the answer not in the manual?
Provides an overview of the instruction manual for the KENWOOD KAC-X401M amplifier.
Important warnings to prevent injury or fire during operation and installation of the amplifier.
Precautions to prevent damage to the amplifier and ensure proper operation.
Crucial safety advice regarding amplifier installation to prevent damage.
Instructions on how to clean the amplifier front panel safely and precautions for cleaning.
Warning regarding radio frequency energy and potential interference from modifications.
Lists the accessories included with the amplifier.
Provides steps and considerations for installing the amplifier, including wire connections and placement.
Details available extension cables for connecting the amplifier, including types and lengths.
Crucial safety advice regarding amplifier placement to prevent heat damage, fire, or injury.
Explains the function of each terminal and connection point on the amplifier.
Details the Low Pass Filter, Band Reject Filter, and Infrasonic Filter switches and frequency controls.
Describes the meaning of each indicator light on the amplifier, including POWER, COOLING FAN, OPERATION/PROTECTION, LOW VOLTAGE, and B.M.S.
Explains the amplifier's protection function, its causes, and how to cancel it.
Details the B.M.S. switch, frequency control, and OPEN/CLOSE button for manual amplifier control.
Explains how to control bass boost and slide panel operations using a compatible Kenwood center unit.
Illustrates how to connect RCA cables for audio input and ground.
Shows how to connect speaker wires to the amplifier's output terminals.
Guidelines on selecting speakers with appropriate input power and impedance for the amplifier.
Explains the EXT.AMP.CONT. terminal for operating multiple amplifiers simultaneously.
Details on connecting power wires, ground wires, and installing protective fuses for safe operation.
Explains how the sigma servo connection reduces distortion and improves sound quality.
Illustrates various sigma servo connection methods, including basic, series, and parallel configurations.
Details how to adjust the band reject filter using a signal generator or spectrum analyzer to reduce resonance.
Lists common issues with the amplifier and provides step-by-step solutions for troubleshooting.
Addresses issues like unexpected slide panel movement and B.M.S. controller malfunctions.
Lists detailed audio performance metrics including power output, frequency response, and signal-to-noise ratio.
Provides general information about the amplifier, such as operating voltage, current consumption, dimensions, and weight.
General