To Next PageTo Next Page
Need help?Do you have a question about the Kenwood eXcelon KAC-X1R and is the answer not in the manual?
General| Amplifier Class | D |
|---|---|
| Number of Channels | 1 |
| RMS Power at 4 Ohms | 500 W |
| Minimum Impedance Unbridged | 1 Ohm |
| Signal to Noise Ratio | 100 dB |
| Bass Boost | 0 - 12 dB |
| Crossover | Variable Low Pass |
| RMS Power at 1 Ohm | 1200 W |
| Low Pass Crossover | 50 - 200 Hz |
| Subsonic Filter | 15Hz - 50Hz |
| Fuse Rating | 40 A |
| Input Sensitivity | 0.2V - 6V |
Essential safety guidelines for wiring, speaker connections, and preventing damage.
Information on proper disposal of electronic equipment and environmental considerations.
Lists required accessories and provides a step-by-step guide for unit installation.
Crucial precautions for selecting an appropriate and safe installation location.
Instructions for mounting and connecting the remote controller accessory.
Critical safety warnings and precautions for connecting power, ground, and signal wires.
Details on wire thickness, stripping, and proper terminal connection for optimal performance.
How to connect the remote control cable for amplifier adjustment.
Guidance on configuring the master unit for simultaneous control of multiple amplifiers.
Instructions for setting up slave amplifiers to match the master unit's performance.
Detailed explanation of the controls and indicators on the main amplifier unit.
Description of the operations and adjustments available via the remote controller.
Steps to select and customize display items for monitoring unit status.
How to set specific display parameters, like temperature units or demo mode.
Explanation of the filter's purpose in reducing acoustic resonance and standing waves.
Methods for accurately adjusting the BRF frequency for optimal sound quality.
A guide to diagnosing and resolving typical problems encountered with the unit.
Comprehensive technical data including power, audio, and general unit parameters.
