Need help?Do you have a question about the Kenwood Basic M2A and is the answer not in the manual?
Prevent fire or electric shock by not exposing the unit to rain or moisture.
Do not remove the cover; no user-serviceable parts inside. Refer servicing to qualified personnel.
Explanation of lightning flash and exclamation point symbols indicating dangerous voltage and important instructions.
Record model and serial numbers for warranty and service information.
Carefully unpack, check for shipping damage, and retain original packaging for future use.
Ensure the AC voltage selector switch matches your local line voltage before connecting power.
Proper placement, ventilation, and avoiding environmental hazards for optimal performance and safety.
Avoid touching internal parts, wet plugs, and keep metal objects away from power sockets.
Clean the cabinet using a silicone cloth or a clean dry cloth; avoid volatile solvents.
Diagrams illustrate connecting turntables, CD players, tuners, tape decks, and speakers.
Safety precautions for using the polarized AC plug with outlets and extension cords in Canada.
Connect speakers to the correct terminals (A, B) and ensure proper wire stripping and connection.
Details on using switched and unswitched AC outlets on the rear panel for other components.
Information on the thermal and speaker protection circuits that safeguard the amplifier.
Description of the power switch, speaker selector, hold time, peak hold, level controls, and headphone jack.
Table of common problems, their causes, and remedies for audio playback issues.
Schematic representation of the amplifier's internal circuitry and signal flow.
Detailed specifications including power output, distortion, frequency response, and signal-to-noise ratio.
Information on power consumption, AC outlets, dimensions, and weight of the amplifier.
To Next Page
General