R
rharrisonAug 21, 2025
What to do if Kenwood Car Receiver displays 'PROTECTING SEND SERVICE'?
- YybrewerAug 21, 2025
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
To Next PageTo Next PageWhat to do if Kenwood Car Receiver displays 'PROTECTING SEND SERVICE'?
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
What to do if sound cannot be heard during playback on Kenwood Car Receiver?
If you're experiencing sound issues during playback on your Kenwood Car Receiver, try reconnecting the Android device. If in [HAND MODE], launch any media player application and start playback. Alternatively, relaunch the current media player application or use another media player application. You can also restart the Android device. If the problem persists, the connected Android device may be unable to route the audio signal to the unit.
What to do if Kenwood Car Receiver does not turn on?
If your Kenwood Car Receiver does not turn on, reset the unit.
How to improve radio reception on Kenwood Car Receiver?
If the radio reception is poor on your Kenwood Car Receiver, connect the antenna firmly and pull the antenna out all the way.
What to do if Kenwood Car Receiver shows 'NO DEVICE' or 'READING' flashing?
If your Kenwood Car Receiver displays “NO DEVICE” or “READING” keeps flashing, switch off the developer options on the Android device and reconnect the Android device. If the problem persists, the connected Android device may not support [BROWSE MODE].
How to fix sound issues on Kenwood Car Receiver?
To address sound issues with your Kenwood Car Receiver, clean the connectors.
What to do if Kenwood Car Receiver shows 'MISWIRING CHECK WIRING'?
If the Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again,” turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, and then turn the power back on.
How to fix 'iPod ERROR' on Kenwood Car Receiver?
If your Kenwood Car Receiver displays “iPod ERROR”, try reconnecting the iPod. If that doesn’t work, reset the iPod.
What to do if disc cannot be ejected from Kenwood Car Receiver?
If the disc cannot be ejected from your Kenwood Car Receiver, press and hold the M button to forcibly eject the disc. If this doesn’t work, reset the unit.
How to fix 'READ ERROR' on Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'READ ERROR', copy the files and folders onto the USB device again. If the problem persists, reset the USB device or try using another USB device.
General| Brand | Kenwood |
|---|---|
| Model | KDC-102U |
| Category | Car Receiver |
| Language | English |
Recording serial numbers for future reference and service.
Safety warnings, volume settings, and general operating advice.
Cleaning the unit, connector, and handling discs.
Identification of physical controls and buttons on the unit.
Explanation of functions and buttons on the RC-406 remote.
Steps to disable the demo mode display upon power-on.
Instructions for setting the current time and date format.
Guide to setting up basic system preferences and audio controls.
Various system configurations and adjustments for the unit.
Key beep, source selection, clock display, and other system configurations.
How to find, tune, and save radio stations.
Using the remote to directly tune to a specific frequency.
Configuration of memory, reception, and program type settings.
Steps to prepare and connect an audio player to the AUX input.
Instructions for playback and customizing the AUX source name.
Basic playback functions like play, pause, skip, and repeat.
Selecting tracks, files, and folders for playback.
Choosing between unit control or device control for iPod/Android.
Quick search methods for files and folders on USB and iPod.
Installing the app, creating an account, and enabling Pandora source.
Creating, saving, and searching for Pandora radio stations.
Functions for playback, skipping tracks, and rating songs.
Installing the app, creating an account, and enabling iHeartRadio source.
Finding stations, skipping cities, deleting, and adding favorite stations.
Basic playback controls and rating options for custom stations.
Accessing and navigating the audio settings menu.
Selecting preset EQs, adjusting bass, treble, loudness, and subwoofer.
Detailed settings for bass, mid, treble, fader, balance, and sound reconstruction.
Adjusting display color, dimmer, and brightness settings.
Configuring how text information scrolls on the display.
Resolving problems with sound, unit power, and radio reception.
Troubleshooting disc errors, playback, and file display problems.
Resolving connection, playback, and compatibility problems with Android devices.
Troubleshooting station creation, playback, and connection errors.
Details on supported CDs, playable files, and unplayable discs.
Information on iPod/iPhone, Android, Pandora, and iHeartRadio compatibility.
How the unit handles incoming phone calls and audio muting.
Technical details for FM/AM tuning, CD playback, and laser diode.
Specifications for audio output, tone controls, and auxiliary input.
Details on USB standards, power output, and physical dimensions.
Safety precautions and advice for professional installation.
Step-by-step guide for installing the unit into the vehicle dashboard.
Diagrams and instructions for connecting speaker, power, and control wires.
Warnings regarding control usage and potential radiation exposure.
Information on RF energy, interference, and compliance with FCC rules.
List of trademarks for Apple, Pandora, iHeartRadio, and Android.
Guidelines for proper disposal of electronic equipment and batteries.
