To Next PageTo Next Page
Need help?Do you have a question about the Kenwood KDC-1040U and is the answer not in the manual?
General| Power Output | 50W x 4 |
|---|---|
| RMS Power Output | 22W x 4 |
| Tuner | AM/FM |
| CD Playback | Yes |
| USB Port | Yes |
| Bluetooth | No |
| Aux Input | Yes |
| Display Type | LCD |
| Preout Voltage | 2.5V |
| MP3 Playback | Yes |
| WMA Playback | Yes |
| FLAC Playback | No |
| Detachable Faceplate | Yes |
| Channels | 4 |
| Preamp Outputs | 2-channel |
Identifies the main controls and buttons on the front of the unit.
Shows the remote control layout and initial setup instructions.
Guides on setting the initial display language and disabling the demo mode.
Instructions for setting the current time and date on the unit.
Covers setting up various initial functions via the FUNCTION menu.
Instructions for updating the unit's firmware.
Instructions on how to tune into radio stations using the unit.
How to begin playing music from CD, USB, iPod, or Android.
How to connect and play audio from an auxiliary device.
Accessing and adjusting various audio control parameters.
Detailed settings for subwoofer level, bass, mid, and treble.
Adjusting custom sound settings for each source.
Controls for illumination colors and zone selection.
Selecting preset colors or creating custom RGB colors for illumination.
Troubleshooting sound, power, and display problems.
Solutions for poor reception and static noise.
Problems with playback order, time, reading, and device recognition.
Troubleshooting common issues with Android device playback.
Critical safety warnings for unit installation and wiring.
Important notes and recommendations for safe installation.
Step-by-step guide for installing the unit into a dashboard.
Instructions for installing the unit without a mounting sleeve.
Diagram and explanation of how to connect the unit's wires.
Key recommendations for safe and proper installation wiring.
Technical specifications related to the CD playback function.
Technical specifications for the USB interface and playback.
Specifications for audio output power, impedance, and tone controls.
