EasyManua.ls Logo

Kenwood KDC-361U - User Manual

Kenwood KDC-361U
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
GET0961-003B (EN)© 2013 JVC KENWOOD Corporation
KDC-361U
KDC-261UB
KDC-261UR
KDC-161UB
CD-RECEIVER
INSTRUCTION MANUAL
CD-RECEIVER
BEDIENUNGSANLEITUNG
KDC-161UR
KDC-161UG
KDC-130Y
KDC-120RY
KDC-100Q
KDC-161URY
CoverSafety003B_KDC-361U[E]f.indd 1CoverSafety003B_KDC-361U[E]f.indd 1 16/10/2013 12:12:51 PM16/10/2013 12:12:51 PM

Questions and Answers

  • G
    gharrisonSep 10, 2025
    Why does my Kenwood KDC-361U display “READING” keeps flashing?
    • K
      Keith WeberSep 10, 2025
      If your Kenwood Car Receiver displays “READING” and keeps flashing, do not use too many hierarchical levels or folders.
  • J
    Jennifer YoungAug 22, 2025
    Why is there no sound coming from my Kenwood KDC-361U Car Receiver?
    • J
      Jennifer HallAug 22, 2025
      If you cannot hear any sound from your Kenwood Car Receiver, first adjust the volume to the optimum level. If the issue persists, check the cords and connections to ensure they are properly connected.
  • H
    heather17Aug 25, 2025
    Why does my Kenwood KDC-361U Car Receiver say “NO DISC”?
    • B
      Brandon KruegerAug 25, 2025
      If your Kenwood Car Receiver displays “NO DISC”, insert a playable disc into the loading slot.
  • J
    Jay PayneAug 26, 2025
    What does “NA DEVICE” mean on my Kenwood Car Receiver?
    • D
      Donald HunterAug 27, 2025
      If your Kenwood Car Receiver displays “NA DEVICE”, connect a supported USB device and check the connections.
  • M
    Margaret JohnsonAug 28, 2025
    What does “NO DEVICE” mean on my Kenwood KDC-361U Car Receiver?
    • I
      istevensAug 28, 2025
      If your Kenwood Car Receiver displays “NO DEVICE”, connect a USB device, and change the source to USB again.
  • J
    Jasmine FuentesAug 29, 2025
    How to fix Kenwood KDC-361U Car Receiver when disc cannot be ejected?
    • J
      Jill PerryAug 29, 2025
      If the disc cannot be ejected from your Kenwood Car Receiver, press and hold to forcibly eject the disc. If that doesn't work, reset the unit.
  • T
    taylorshannonSep 18, 2025
    How to connect the MUTE wire to my telephone using Kenwood KDC-361U?
    • L
      ljacksonSep 18, 2025
      To enable muting upon receiving a phone call with your Kenwood Car Receiver, connect the MUTE wire to your telephone using a commercial telephone accessory.
  • B
    barneskirkSep 12, 2025
    Why does my Kenwood KDC-361U Car Receiver not work at all?
    • A
      Angela GreenSep 12, 2025
      If your Kenwood Car Receiver does not work at all, reset the unit.
  • C
    cochranlisaSep 8, 2025
    Why does my Kenwood KDC-361U make noise?
    • J
      Jean JohnsonSep 8, 2025
      If your Kenwood Car Receiver is generating noise, skip to another track or change the disc.
  • M
    Michael HarrisSep 5, 2025
    Why does my Kenwood Car Receiver display “TOC ERROR”?
    • M
      Mr. Eric StevensonSep 5, 2025
      If your Kenwood Car Receiver displays “TOC ERROR”, make sure the disc is clean and inserted properly.

Kenwood KDC-361U Specifications

General IconGeneral
TypeCD Receiver
TunerAM/FM
CD PlaybackYes
MP3 PlaybackYes
WMA PlaybackYes
USB InputYes
AUX InputYes
BluetoothNo
Display TypeLCD
RDSYes
Detachable FaceplateYes
Remote ControlYes
Preset EQYes
Built-in AmplifierYes
Channels4
Max Power Output50 watts x 4
RMS Power Output22 watts x 4

Related product manuals