Do you have a question about the Kenwood KDC-D300 and is the answer not in the manual?
laser diode wavelength | 780 nm |
---|---|
digital filter oversampling | 8 Times Over Sampling |
D/A converter | 1 Bit |
spindle speed | 500 – 200 rpm |
frequency response | 5 Hz – 20 kHz |
total harmonic distortion | 0.01 % |
signal to noise ratio | 94 dB |
dynamic range | 94 dB |
channel separation | 85 dB |
operating voltage | 14.4 V (11 – 16 V allowable) |
---|---|
current consumption | 0.6 A |
installation size | 182 × 50 × 145 mm |
weight | 1.3 kg |
Warning against loading 3-inch CDs with adapters due to potential unit damage.
Note on compatibility with older control units and the need for an optional accessory.
Instructions for cleaning unit components, faceplate terminals, and the CD slot.
Explanation of CLASS 1 LASER PRODUCT marking, indicating safe laser beam usage.
Explanation of condensation on the lens and how to resolve it.
Guidelines for handling, cleaning, removing, and storing CDs, and avoiding specific accessories or CD types.
Identification of main buttons and display elements on the unit.
Instructions for playing CDs, including operation modes 'N' and 'O'.
How to switch and view different spectrum analyzer display patterns.
Procedure for naming discs for easy identification.
Steps for ejecting a CD and adjusting the spectrum analyzer display level.
Instructions for removing and reattaching the detachable faceplate.
List and visual identification of accessories provided with the unit.
Steps for installing the unit, including setting the O-N switch and wiring connections.
Guidance on physically mounting the unit in a vehicle, with or without a center compartment.
Detailed steps for safely removing the unit from its mounting.
Table listing common problems, their possible causes, and solutions.
Explanation of displayed error codes (E-01, EJECT, NO PANEL, E-30, E-04, E-99, E-0d) and their solutions.
Technical details for the CD player components like laser diode, filters, and frequency response.
General technical data including operating voltage, current consumption, and weight.