To Next PageTo Next PageHow to fix 'READ ERROR' on Kenwood Car Receiver?
If your Kenwood Car Receiver displays 'READ ERROR', copy the files and folders onto the USB device again. If the problem persists, reset the USB device or try using another USB device.
What to do if disc cannot be ejected from Kenwood Car Receiver?
If the disc cannot be ejected from your Kenwood Car Receiver, press and hold the M button to forcibly eject the disc. If this doesn’t work, reset the unit.
What to do if Kenwood Car Receiver displays 'PROTECTING SEND SERVICE'?
If your Kenwood Car Receiver displays “PROTECTING SEND SERVICE”, send the unit to the nearest service center.
What to do if Kenwood Car Receiver shows 'MISWIRING CHECK WIRING'?
If the Kenwood Car Receiver displays the message “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals of the speaker wires are insulated properly. Turn the power on again,” turn the power off. Check to ensure the terminals of the speaker wires are properly insulated, and then turn the power back on.
Why is there no sound during playback on my Kenwood Car Receiver?
If you are experiencing no sound during playback on your Kenwood Car Receiver, try the following: - Reconnect the Android device. - If in [HAND MODE], launch any media player application from the Android device and start playback. - If in [HAND MODE], relaunch the current media player application or use another media player application. - Restart the Android device. If the problem persists, the connected Android device may be unable to route the audio signal to the unit.
Why is the radio reception poor on my Kenwood Car Receiver?
If you are experiencing poor radio reception on your Kenwood Car Receiver, ensure the antenna is firmly connected and pull the antenna out completely.
What to do if my Kenwood Car Receiver displays 'PROTECTING SEND SERVICE'?
If your Kenwood Car Receiver displays 'PROTECTING SEND SERVICE', send the unit to the nearest service center.
Why is there no sound coming from my Kenwood Car Receiver?
If you cannot hear any sound from your Kenwood Car Receiver, first, make sure that the volume is set to an audible level. Also, check the cords and connections to ensure they are properly connected.
How to fix sound issues on Kenwood Car Receiver?
To address sound issues with your Kenwood Car Receiver, clean the connectors.
What to do if Kenwood Car Receiver shows 'NO DEVICE' or 'READING' flashing?
If your Kenwood Car Receiver displays “NO DEVICE” or “READING” keeps flashing, switch off the developer options on the Android device and reconnect the Android device. If the problem persists, the connected Android device may not support [BROWSE MODE].
General| Brand | Kenwood |
|---|---|
| Model | KDC-MP162U |
| Category | Car Receiver |
| Language | English |
Essential safety advice for operating the unit and avoiding hazards.
Advice on safe driving, unit handling, and remote control usage.
Instructions for cleaning the unit, connectors, and handling discs properly.
Identifies controls and components on the unit's front faceplate.
Explains the functions and operation of the remote control unit.
Details how to turn the unit on/off, adjust volume, and select sources.
Steps to disable the unit's demonstration mode for normal operation.
Instructions for setting the unit's internal clock and time format.
Guide to setting up initial system configurations like audio and display.
Settings for system behavior, key beeps, and source selection options.
How to search for stations, store presets, and use direct access tuning.
Details on tuner settings like Auto Memory, Mono Set, News Set, and PTY Search.
Instructions for connecting and setting up an external audio device via AUX.
Guide to playing music from various media sources like CDs, USB drives, iPods, and Android devices.
How to play, pause, skip tracks, repeat, and manage playback modes.
Methods for selecting files, folders, and using quick search features.
Settings for Android devices, including browse mode and music drive selection.
Steps to prepare, connect, and start listening to Pandora through the unit.
How to create, save, search, and bookmark Pandora stations and artists.
Instructions for setting up and listening to iHeartRadio broadcasts via the unit.
Guide to searching, skipping cities, and deleting stations within iHeartRadio.
Comprehensive guide to adjusting audio settings like EQ, Bass, Loudness, and Subwoofer.
Details on setting Bass, Mid, Treble levels, EQ Pro, Fader, and Balance.
How to adjust display colors, dimmer, brightness, and text scroll behavior.
Solutions for common issues like no sound, wiring errors, or unit not turning on.
Solutions for common errors related to CD, USB, iPod, and Android playback.
Troubleshooting steps for Pandora and iHeartRadio connection and station errors.
Details on playable disc formats, USB devices, iPod/iPhone compatibility, and Android OS support.
Information on KENWOOD Music Editor, Pandora, iHeartRadio, and phone call muting.
Detailed technical data for FM/AM tuner sensitivity, frequency response, and CD player performance.
Specifications for audio output, USB standards, auxiliary inputs, general operating conditions, and weight.
Step-by-step guide for installing the unit into a vehicle's dashboard.
Instructions on how to detach the unit, remove it, and connect the wiring harness properly.
Diagram and explanation for connecting speakers, power, ignition, and ground wires.
Details on connecting optional accessories like navigation systems and steering wheel remotes.
Important cautions regarding operation, radiation exposure, and laser product safety.
Information on FCC regulations, potential interference, and compliance statements.
Details on warranty coverage and procedures for products purchased through the U.S. military exchange.
Explains warranty period, covered items, limitations, and exclusions for Kenwood products.
Specific warranty terms, coverage, exclusions, and service procedures for the U.S.A.
Outlines warranty coverage, exclusions, and service procedures for Canada and Brazil.
