Kenwood KDC-MP443U User Manual

CD-RECEIVER
KDC-MP5043U
KDC-MP543U
KDC-MP443U
INSTRUCTION MANUAL
© B64-4439-00/00 (MW)
B64-4439-0000MEnglish.indd1B64-4439-0000MEnglish.indd1 08.9.241:53:09PM08.9.241:53:09PM

Kenwood KDC-MP443U Specifications

FM Tuner Section

frequency range (200 kHz space)	87.9 MHz – 107.9 MHz
frequency range (50 kHz space)	87.5 MHz – 108.0 MHz
usable sensitivity (S/N = 30dB)	9.3dBf (0.8 μV/75 Ω)
quieting sensitivity (S/N = 50dB)	15.2dBf (1.6 μV/75 Ω)
frequency response (±3 dB)	30 Hz – 15 kHz
signal to noise ratio (MONO)	70 dB
selectivity (±400 kHz)	≥ 80 dB
stereo separation (1 kHz)	40 dB

AM Tuner Section

frequency range (10 kHz space)	530 kHz – 1700 kHz
frequency range (9 kHz space)	531 kHz – 1611 kHz
usable sensitivity (S/N = 20dB)	28 dBμ (25 μV)

CD Player Section

laser diode	GaAlAs
digital filter (D/A)	8 Times Over Sampling
D/A converter	24 Bit
spindle speed	500 – 200 rpm (CLV)
wow & flutter	Below Measurable Limit
frequency response (±1 dB)	20 Hz – 20 kHz
total harmonic distortion (1 kHz)	0.01 %
signal to noise ratio (1 kHz)	105 dB
dynamic range	93 dB
MP3 decode	Compliant with MPEG-1/2 Audio Layer-3
WMA decode	Compliant with Windows Media Audio

USB Interface

USB standard	USB1.1/ 2.0 (Full speed)
maximum supply current	500 mA
file system	FAT16/ 32
MP3 decode	Compliant with MPEG-1/2 Audio Layer-3
WMA decode	Compliant with Windows Media Audio

Audio Section

maximum output power	50 W x 4
full bandwidth power (at less than 1% THD)	22 W x 4
speaker impedance	4 – 8 Ω
tone action (Bass)	100 Hz ±8 dB
tone action (Middle)	1 kHz ±8 dB
tone action (Treble)	10 kHz ±8 dB
preout level / load (CD)	2000 mV/10 kΩ
preout impedance	≤ 600 Ω

Auxiliary Input

frequency response (±3 dB)	20 Hz – 20 kHz
input maximum voltage	1200 mV
input impedance	10 kΩ

General

operating voltage (11 – 16V allowable)	14.4 V
maximum current consumption	10 A
installation size (W x H x D)	182 x 53 x 155 mm
weight	1.3 kg